JPStokes Posted May 4, 2013 Share Posted May 4, 2013 Hi guys, I have a Concord 4 Alarm Panel with the Automation Module connected to the serial port of a PC and it's working great. I'm wondering if it's possible to plug it into the ISY-994 serial port and interface to it by writing some code using the SDK, of if the only way to access the serial port on the ISY is through system programs that the smart people at Universal Devices has to write (like through an add-on module). Right now I'm using X10 commands out of the Concord 4 to figure out the arming level of the panel and when doors and windows are open, but only nine X10 codes are used by the Panel so I'm pretty limited in what I can do. Connecting to the panel directly will give me access to a lot of information I can use to control the lights in my house. Thanks, Joe Link to comment
Michel Kohanim Posted May 5, 2013 Share Posted May 5, 2013 Hi Joe, Unfortunately not. With kind regards, Michel Link to comment
JPStokes Posted May 5, 2013 Author Share Posted May 5, 2013 Is there a way that I could have the visual basic program on the PC send variable updates to the ISY? Not as functional, but at least the ISY could know the status and use it in its programs. Link to comment
Michel Kohanim Posted May 5, 2013 Share Posted May 5, 2013 Hi JPStokes, Yes, you can: http://www.universal-devices.com/isy-developers ... checkout WSDK and C# examples. With kind regards, Michel Link to comment
autelis Posted September 20, 2013 Share Posted September 20, 2013 Autelis Universal RS232 Interface for ISY now supports Concord Alarms viewtopic.php?f=78&t=12324&p=94771 Thanks! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.