ISYhbsh01 Posted July 28, 2013 Posted July 28, 2013 This morning I noticed that programs were not working & the iSY was locked up. I unplugged the ISY and plugged it back in & the ISY was still locked up. I then noticed that the LED on the PLM was solid orange which I thought was unusual. So I unplugged both, the ISY & the PLM & that fixed it. Any ideas why this would happen & what a solid orange LED on the PLM means? Sent from my SPH-D710 using Tapatalk 2
Michel Kohanim Posted July 29, 2013 Posted July 29, 2013 Hello hsbh01, That's not good. As far as I know, a red/orange light on the PLM means error. Can you paste the last 10 minutes of our log and error log before restarting ISY? With kind regards, Michel
ISYhbsh01 Posted July 29, 2013 Author Posted July 29, 2013 See the logs below. Note, that the last time I successfully controlled a device before I noticed that it was locked up was at 4:24 AM on 7/28. I restarted the ISY & PLM at 12:14 PM. Also I see quite some errors in the error log. I am including a little more than what you requested so you can perhaps tell me what's going on overall as some error codes are not mentioned in the wiki. I am currently on a ISY-99 & still on version 3.2.6. I actually bought an ISY-994 but didn't get around to do the upgrade yet. Thank you Log: FanLinc-Light-14.F5.A8 Status 30% Sun 2013/07/28 04:17:20 AM System Log MBR Bedside 19.23.38.1.1 Status 100% Sun 2013/07/28 04:17:20 AM System Log MBR Door 1A.1D.2F.1.1 Status 100% Sun 2013/07/28 04:17:20 AM System Log M. Bed Light 19.34.19.1.D Status 100% Sun 2013/07/28 04:17:20 AM System Log FanLinc-Light-14.F5.A8 Status 0% Sun 2013/07/28 04:24:27 AM System Log MBR Bedside 19.23.38.1.1 Status 0% Sun 2013/07/28 04:24:27 AM System Log MBR Door 1A.1D.2F.1.1 Status 0% Sun 2013/07/28 04:24:27 AM System Log M. Bed Light 19.34.19.1.D Status 0% Sun 2013/07/28 04:24:27 AM System Log A. Bed Light 19.31.52.1.B Status 100% Sun 2013/07/28 04:24:28 AM System Log A. Bed Light 19.31.52.1.1 Beep 5 Sun 2013/07/28 04:24:28 AM Program Log A. Bed Light 19.31.52.1.D Status 0% Sun 2013/07/28 04:24:30 AM System Log MBR AC On 255 Sun 2013/07/28 04:24:30 AM Program Log MBR AC Status 100% Sun 2013/07/28 04:24:31 AM System Log 14.67.0A - Cool Control Status On Sun 2013/07/28 04:52:40 AM System Log 14.67.0A - Main Heat/Cool State Cool On Sun 2013/07/28 04:52:40 AM System Log 14.67.0A - Main Status 72â–‘ Sun 2013/07/28 04:53:22 AM System Log 14.67.0A - Cool Control Status Off Sun 2013/07/28 05:03:23 AM System Log 14.67.0A - Main Heat/Cool State Off Sun 2013/07/28 05:03:23 AM System Log 0 null Sun 2013/07/28 12:14:42 PM System Start Scene:My Lighting Status Query Sun 2013/07/28 12:14:48 PM System Log Error Log: Sat 2013/07/27 03:58:17 AM System -170001 [Auth] 199.68.230.204:57127->80, Num=3 Sat 2013/07/27 09:06:29 AM System -100 No network connection Sat 2013/07/27 09:06:34 AM System -170001 [Network] Established Sat 2013/07/27 03:26:07 PM System -170001 [Auth] 37.46.193.104:40646->80, Num=4 Sat 2013/07/27 08:28:16 PM System -170001 [Auth] 178.255.87.241:45685->80, Num=5 Sun 2013/07/28 06:51:47 AM System -5 Start Sun 2013/07/28 06:52:07 AM System -170001 [Network] Established Sun 2013/07/28 06:52:10 AM System -60001 pool.ntp.org Sun 2013/07/28 09:01:20 AM System -100 No network connection Sun 2013/07/28 12:11:20 PM System -5 Start Sun 2013/07/28 12:11:40 PM System -170001 [Network] Established Sun 2013/07/28 12:13:45 PM System -170001 [uDSockets] RSub:39 error:6 Sun 2013/07/28 12:13:50 PM System -170001 [uDSockets] RSub:39 error:6 Sun 2013/07/28 12:14:42 PM System -5 Start Sun 2013/07/28 12:14:48 PM System -170001 [Network] Established Sun 2013/07/28 12:15:50 PM System -5012 26 Sun 2013/07/28 12:15:51 PM System -5006 uuid:26 Sun 2013/07/28 12:16:08 PM System -5006 uuid:26 Sun 2013/07/28 12:16:11 PM System -5006 uuid:26 Sun 2013/07/28 12:16:14 PM System -5006 uuid:26 Sun 2013/07/28 02:37:58 PM System -170001 [uDSockets] RSub:39 error:6 Sun 2013/07/28 02:38:00 PM System -5012 27 Sun 2013/07/28 02:38:07 PM System -5006 uuid:27 Sun 2013/07/28 02:38:14 PM System -5006 uuid:27 Sun 2013/07/28 05:31:53 PM System -5012 28 Sun 2013/07/28 05:31:55 PM System -5006 uuid:28 Sun 2013/07/28 05:31:57 PM System -5006 uuid:28 Sun 2013/07/28 06:45:36 PM System -170001 [uDSockets] RSub:41 error:6 Sun 2013/07/28 06:45:41 PM System -5012 29 Sun 2013/07/28 06:45:42 PM System -5006 uuid:29 Sun 2013/07/28 06:45:48 PM System -5006 uuid:29 Sun 2013/07/28 06:55:54 PM System -5012 30 Sun 2013/07/28 06:55:58 PM System -5006 uuid:30 Sun 2013/07/28 06:56:02 PM System -5006 uuid:30 Sun 2013/07/28 07:48:17 PM System -170001 [uDSockets] RSub:39 error:6 Sun 2013/07/28 07:54:37 PM System -170001 [uDSockets] RSub:39 error:6 Sun 2013/07/28 07:54:42 PM System -170001 [uDSockets] RSub:39 error:6 Sun 2013/07/28 07:54:47 PM System -5012 32 Sun 2013/07/28 07:55:27 PM System -5006 uuid:32 Sun 2013/07/28 07:55:38 PM System -5006 uuid:32 Sun 2013/07/28 07:55:46 PM System -5012 33 Sun 2013/07/28 07:55:56 PM System -5006 uuid:33 Sun 2013/07/28 07:56:07 PM System -5006 uuid:33 Mon 2013/07/29 07:07:38 AM System -170001 [Auth] 93.174.93.213:60807->80, Num=3 Mon 2013/07/29 07:07:39 AM System -170001 [Auth] 93.174.93.213:60821->80, Num=4 Mon 2013/07/29 07:07:39 AM System -170001 [Auth] 93.174.93.213:60852->80, Num=5 Mon 2013/07/29 07:07:39 AM System -170001 [Auth] 93.174.93.213:60869->80, Num=6 Mon 2013/07/29 07:07:39 AM System -10108 Check log Mon 2013/07/29 07:07:39 AM System -170001 [Auth] 93.174.93.213:60884->80, Num=7 Mon 2013/07/29 07:07:39 AM System -10108 Check log Mon 2013/07/29 09:01:45 AM System -100 No network connection Mon 2013/07/29 09:01:50 AM System -170001 [Network] Established
Michel Kohanim Posted July 29, 2013 Posted July 29, 2013 Hi hbsh01, Thank you. I suspect this is related to UPnP traffic. The first thing I recommend is upgrade to 3.3.10 and then, if that doesn't fix the issue, move on to 4.0.5 on your 994. With kind regards, Michel
ISYhbsh01 Posted July 30, 2013 Author Posted July 30, 2013 I am using the port forwarding settings in my router & not the "enable internet access" option, if that makes a difference. I will upgrade to 3.3.10 as soon as I get a chance & see if that helps. While it's on my todo list to switch to the ISY-994 for my home, I was still planning to use the ISY-99 for my office.
Michel Kohanim Posted July 30, 2013 Posted July 30, 2013 Hi hbsh01, File | Enable Internet Access does not have any bearings on this issue UNLESS you have recently changed your router. You can certainly use 99 in the office since most of these issues are related to UPnP media server/streaming. With kind regards, Michel
ISYhbsh01 Posted July 30, 2013 Author Posted July 30, 2013 Hi hbsh01, File | Enable Internet Access does not have any bearings on this issue UNLESS you have recently changed your router. You can certainly use 99 in the office since most of these issues are related to UPnP media server/streaming. With kind regards, Michel I don't know much about UPNP, but I don't have any media server/streaming devices at home. Sent from my SPH-D710 using Tapatalk 2
Recommended Posts