jaherrerab Posted October 16, 2013 Share Posted October 16, 2013 When I try to add button to IRLinc Transmiter, the 2411T is identified (in this case: f.a4.3b), but "cannot add Insteon device" message is displayed with the following event log, Could you help me? thanks: ISY: ISY99i pro (1040) v.3.3.10 IRLinc: 2411T v 1.3 mar 10/15/2013 21:51:32 : Start Insteon Device Linking Mode mar 10/15/2013 21:51:32 : [LNK-BGN ] 02 64 01 00 06 mar 10/15/2013 21:52:42 : [LNK-STAT ] 02 53 M(01) gid=00 0F.A4.3B 0307 49 mar 10/15/2013 21:52:42 : [0F.A4.3B 00] Linked device type=03.07 fw=49 mar 10/15/2013 21:52:42 : [F A4 3B 0 ] Added to list of devices to link to ISY mar 10/15/2013 21:52:42 : [LNK-BGN ] 02 64 01 00 06 mar 10/15/2013 21:55:13 : Stop Insteon Device Linking Mode, Final processing to follow mar 10/15/2013 21:55:13 : [iNST-TX-I1 ] 02 62 0F A4 3B 0F 0D 00 mar 10/15/2013 21:55:13 : [LNK-END ] 02 65 06 mar 10/15/2013 21:55:13 : [std MH ] Unexpected Ack imCmd=65 cmd1= 0x3B mar 10/15/2013 21:55:14 : [iNST-ACK ] 02 62 0F.A4.3B 0F 0D 00 06 (00) mar 10/15/2013 21:55:14 : [iNST-SRX ] 02 50 0F.A4.3B 25.2A.4E 2B 0D 01 (01) mar 10/15/2013 21:55:14 : [std-Direct Ack] 0F.A4.3B-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 mar 10/15/2013 21:55:18 : [iNST-TX-I1 ] 02 62 0F A4 3B 0F 0D 00 mar 10/15/2013 21:55:18 : [iNST-ACK ] 02 62 0F.A4.3B 0F 0D 00 06 (00) mar 10/15/2013 21:55:19 : [iNST-SRX ] 02 50 0F.A4.3B 25.2A.4E 2B 0D 01 (01) mar 10/15/2013 21:55:19 : [std-Direct Ack] 0F.A4.3B-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 mar 10/15/2013 21:55:19 : [F A4 3B 0 ] Calibrating engine version mar 10/15/2013 21:55:19 : [F A4 3B 0 ] May not fully support i2, reverting to i1 mar 10/15/2013 21:55:19 : [F A4 3B 0 ] Using Database Link Table offset 0x0FF8 (reported 0x0000) mar 10/15/2013 21:55:19 : [iNST-TX-I2 ] 02 62 0F A4 3B 1F 2F 02 00 00 00 10 01 00 00 00 00 00 00 00 00 BE mar 10/15/2013 21:55:19 : [iNST-ACK ] 02 62 0F.A4.3B 1F 2F 02 00 00 00 10 01 00 00 00 00 00 00 00 00 BE 06 (02) mar 10/15/2013 21:55:19 : [iNST-SRX ] 02 50 0F.A4.3B 25.2A.4E 2B 2F 02 (02) mar 10/15/2013 21:55:19 : [std-Direct Ack] 0F.A4.3B-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 mar 10/15/2013 21:55:20 : [iNST-ERX ] 02 51 0F A4 3B 25 2A 4E 1B 2F 01 00 01 00 10 00 00 00 00 00 00 00 00 00 00 mar 10/15/2013 21:55:20 : [Ext-Direct ] 0F.A4.3B-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 mar 10/15/2013 21:55:20 : [F A4 3B 0 ] IRLincTX addr=0x0010 .. Read [0000000000] mar 10/15/2013 21:55:20 : [F A4 3B 0 ] Failed to add device mar 10/15/2013 21:55:20 : [ Time] 21:55:46 0(0) Link to comment Share on other sites More sharing options...
Michel Kohanim Posted October 17, 2013 Share Posted October 17, 2013 Hello jaherrerab, Did you follow the instructions here? http://wiki.universal-devices.com/index ... ransmitter With kind regards, Michel Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.