Oliver Posted January 2, 2014 Share Posted January 2, 2014 I have been using Indigo on a Mac to control my many devices and wanted a stand alone box for a controller. The ISY994i seemed to be what I wanted but now I am having trouble with a couple of programming issues. In this post, I am wondering how to edit and upload the Device Settings for an EZIO4. There doesn't seem to be a way to do that using ISY99i. So, I have to use Indigo to do it but that is not what I want to do in the field where I don't have a Mac running Indigo. Oliver Link to comment
LeeG Posted January 3, 2014 Share Posted January 3, 2014 The output timers are the only thing yhat would be useful. The ISY does not support setting the output timers. The free Simplehomenet Utility Suite from Simplehomenet/Smartenit can be used on a windows system. Link to comment
Oliver Posted January 3, 2014 Author Share Posted January 3, 2014 Thanks for the reply. I also have an EZIO2X4 and need to set the analog trip points. Is this also not supported? Oliver Link to comment
LeeG Posted January 3, 2014 Share Posted January 3, 2014 The ISY does not support those Inputs in Analog mode. That would not only require setting the analog trip points, the Configuration Register would require management as well. The ISY does not know about the Analog aspects of the Configuration Register and would wipe out the settings. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.