mbrossart Posted January 28, 2014 Posted January 28, 2014 I notice that the set button on two of my eight button keypadlincs glow red. Is that significant or expected behavior? If the former, is there a way to fix it? I tried doing a factory reset, but it doesn't change this.
Xathros Posted January 28, 2014 Posted January 28, 2014 Hi mbrossart- I am assuming this is a V.43 firmware KPL. These newer KPLs are coming with a multicolor LED behind the set button. From the User manual: Error Blink Default = on This setting is adjustable via software or a central controller only. Keypad Dimmer LED blinks red for a few seconds if one or more responders do not acknowledge a message. LED Behavior Keypad has a dual-color green and red LED which momentarily indicates if a button press was successfully communicated to all scene members. LED State Meaning Blinks green once - One or more scene members acknowledge the button press. Blinks red once - One or more scene members did not acknowledge the button press (note: scene members may still have heard the scene command and adjusted their settings) This doesn't explain a constant steady red condition. If this wasn't happening on 2 different KPL's I would have said device failure. Do they operate properly aside from the red glow? I have one of these newer KPL's and don't notice any red glow even when the room is dark. -Xathros
Recommended Posts