Control Stargate with Network Resources

[CCline]

I'm trying to control relays on my Stargate with network resources.

This URL encoded command works in a web browser to turn off relay 7:

"http://192.168.1.11/sendcommand2.cgi?var1=%23%23%253300194000&var2=str&var3=%23%230&var4=UserName&var5=Password"

How do I set that up in network resources?

[Michel Kohanim]

Hi cBc,

 

Protocol: http:

Method: GET

Host: 192.168.1.11

Port: 80

Path: /sendcommand2.cgi?var1=##253300194000&var2=str&var3=##0&var4=UserName&var5=Password

Check: URL Encoded

(%23 = #)

 

With kind regards,

Michel

[CCline]

When I run Test I get error "Request Failed" and "N/A" in Resource Response.

I'm not sure if you meant to leave the % out shown in red below, I tried both ways.

/sendcommand2.cgi?var1=##%3300194000&var2=str&var3=##0&var4=UserName&var5=Password

"var3" is the string returned by Stargate when successful.

[Michel Kohanim]

Hi cBc,

 

What's the % in your path?

 

Did you get any status codes as well? If you only got request failed then two possibilities:

1. ISY cannot connect to Stargate

2. Stargate does NOT respond to the command (you might want to increase the timeout)

 

With kind regards,

Michel

[CCline]

The % is part of the string being sent (##%3300190101)

I notice when I check Encode URL, it replaces the % with %25 but doesn't replace the # with %23 as shown in the "Resource Editor.jpeg".

I've tried entering them myself without checking and changed timeout to 5 seconds.

The "Browser.jpg" shows the command returns "##0"

[Michel Kohanim]

Hi cBc,

 

Please copy the path as you have on the browser and UNCHECK encode URL. Let me know what error you get from ISY.

 

With kind regards,

Michel

[CCline]

The first time I ran it I got

"Subscriber didn't replay to event:1 [69]"

and

"TCP client request failed [Net Module Rule: 7404]"

Sometimes I just get "N/A"

[Michel Kohanim]

Hello cBc,

 

404 means "not found".

 

Can you paste the Path you are using in your network resource here. Again, please use the latter part of the URL that you see in Safari starting with sendCommand.cgi AS IS. And, make sure you do NOT check Encode URL.

 

With kind regards,

Michel

[CCline]

Path:

/sendcommand2.cgi?var1=%23%23%253300190101&var2=str&var3=%23%230&var4=UserName&var5=Password

 

Actual:

GET /sendcommand2.cgi?var1=%23%23%253300190101&var2=str&var3=%23%230&var4=UserName&var5=Password HTTP/1.1

Host: 192.168.1.11:8083

User-Agent: Mozilla/4.0

Connection: Close

Content-Type: application/x-www-form-urlencoded

[Michel Kohanim]

Hi cBc,

 

Do you still get a 404 with this resource?

 

Is it at all possible to put your stargate on the internet so that we can test it remotely? If so, please reset the userid/password for your stargate and send the URL to support@universal-devices.com and we'll try to figure out the root cause.

 

With kind regards,

Michel