JeffWLeach Posted June 15, 2014 Posted June 15, 2014 How do I configure the location? If I go to Climate tab in the configuration tab in the Universal Devices Console. The Information still says WeatherBug. The location ID does not work. In Location ID I put in my zip code of 60004 and a screen popup asking me to make a selection but the choices are blank. I am on the latest beta release insteon_4.2.4.
MWareman Posted June 15, 2014 Posted June 15, 2014 It sounds like your admin console version does not match your ISY version. Have you clears the Java cache? http://wiki.universal-devices.com/index ... Java_Cache
JeffWLeach Posted June 16, 2014 Author Posted June 16, 2014 I tried that and it is still the same. The Climate tab still says WeatherBug.
Xathros Posted June 16, 2014 Posted June 16, 2014 JeffWLeach- The new weather module does not work with Zipcodes. Enter your City/Town name then hit find and select the station that best suits your needs. -Xathros
Brian H Posted June 16, 2014 Posted June 16, 2014 When you go to the Help Tab. About choice. Does it show 4.2.4 for both the UI and the Firmware?
JeffWLeach Posted July 2, 2014 Author Posted July 2, 2014 The firmware and UI match v.4.2.5 and I cleared the Java Cache. The climate tab has Weather provider a check box for enabled is not checked Location ID is blank Unit is English (F) Polling Interval (sec) is 300 What do I do? Firmware documentation says "you will need to reconfigure your Climate Module to point to HAM Weather Stations instead of WeatherBug" how do I do that? Is there documentation?
Michel Kohanim Posted July 2, 2014 Posted July 2, 2014 Hi Jeff, Click on the Find button and enter your city. If you are still having problems, please do not hesitate to submit a ticket. With kind regards, Michel
JeffWLeach Posted July 2, 2014 Author Posted July 2, 2014 This takes some effort. From reading another thread on this forum you need to use the nearest airport. I live in Arlington Heights, IL the find point to Mount Prospect. The weather data is not correct for example humidity was 0% when it is 65%. I need to select the nearest airport where the weather comes from and that is palwaukee airport. Once I did that it works. What about this "Climate Module to point to HAM Weather Stations instead of WeatherBug". This was requested on the firmware page. I don't see any place to do that.
LeeG Posted July 2, 2014 Posted July 2, 2014 4.2.5 uses HAM. WeatherBug is no longer used. Being on 4.2.5 has the Climate Module using HAM.
Recommended Posts