I have the following scene called 'Downstairs - Kitchen'.  As you can scene from the image attached below it contains a Dual Band Switchlinc (20.93.9B) and a Remotelinc Button A (0A.0A.64)

 

 

My problem is when I trigger the 'Downstairs - Kitchen' scene on or off, it not only turns on or off switchlinc (20.93.9B) but it also turns on or off a Dual Band Outlinc Dimmer (2A.74.1C) thats not even in the scene.

 

I am sure I don't have any other programs or scences that would also trigger the Dual Band Outlinc Dimmer (2A.74.1C) on or off.

 

When I do a scene test on the 'Downstairs - Kitchen' scene this is the result:

 

Sun 07/13/2014 08:46:59 PM : [GRP-RX      ] 02 61 1B 13 00 06

Sun 07/13/2014 08:46:59 PM : [iNST-SRX    ] 02 50 2A.74.1C 23.98.41 61 13 1B    LTOFFRR(1B)

Sun 07/13/2014 08:46:59 PM : [std-Cleanup Ack] 2A.74.1C-->ISY/PLM Group=0, Max Hops=1, Hops Left=0

Sun 07/13/2014 08:47:00 PM : [CLEAN-UP-RPT] 02 58 06

Sun 07/13/2014 08:47:00 PM : [iNST-SRX    ] 02 50 20.93.9B 23.98.41 62 13 1B    LTOFFRR(1B)

Sun 07/13/2014 08:47:00 PM : [std-Cleanup Ack] 20.93.9B-->ISY/PLM Group=0, Max Hops=2, Hops Left=0

----- Downstairs - Kitchen Test Results -----
[ignore] Remote Grey - Button A (A A 64 1)
[succeeded] Downstairs - Kitchen (20 93 9B 1)
----- Downstairs - Kitchen Test Results -----

 

Not sure wha this means but I do see the address for the Dual Band Outlinc Dimmer (2A.74.1C) in the second line. 

 

How to I trouble shoot this and correct it?

 

The PLM has 2A.74.1C in the Scene.  

 

Delete the Scene and redefine.

Edited July 14, 201411 yr by LeeG

The plot thickens.  Within ISY I deleted the scene and recreated it.  All works fine, I now use the Remotelinc Button A (0A.0A.64) and it turns on and off the Dual Band Switchlinc (20.93.9B) only.

 

However, when I use Mobilinc to trigger the scene it turns on both the Dual Band Switchlinc (20.93.9B) and also the Dual Band Outlinc Dimmer (2A.74.1C) again.   I did a re-sync with Mobilinc (download all) and still the issue pesists.  Compeltely stumped. 

Hi jwagner010,

 

If you are still having problem, please do not hesitate to contact our tech support (links below).

 

With kind regards,

Michel