mcgedoue Posted December 9, 2014 Share Posted December 9, 2014 (edited) Seems simple enough, but I can seem to get below notify variable to work. Just want to be notified I'm away if the temp inside goes above or below range below to indicate a problem. There doesn't seem to be the built in variable in the message options, so found the wiki article about Custom Email Substitution Variables. http://wiki.universal-devices.com/index.php?title=ISY-99i_Series_INSTEON:Custom_Email_Substitution_Variables I still can't seem to get it to notify with current Tstat indoor temp. If <Whatever program here> Then Send Notification to 'Text' content 'Message' ------------------------------------------------------ Message Body... Thermostat temp is: ${sys.node.11 22 AA 1.ST} Edited December 11, 2014 by mcgedoue Link to comment
clarkes71 Posted December 9, 2014 Share Posted December 9, 2014 Not sure if it is a typo on your post or in your program but you need to alter... Or Status 'Thermostat - Main' < 60° (Temperature) Link to comment
mcgedoue Posted December 11, 2014 Author Share Posted December 11, 2014 Yes that was a typo, but the issue is getting the correct tstat variable to actually send me a text with current temp Link to comment
clarkes71 Posted December 12, 2014 Share Posted December 12, 2014 This is the only way I know of to get the current temp to variable. One program for each temp or maybe break up into temp ranges, like temp between 85-90 and set $i.tstat to 87.5 (or something like that). If Status 'Hallway 01 / Thermostat- Main' is 90° (Temperature) Then $i.tstat = 90 Else - No Actions - (To add one, press 'Action') Link to comment
Michel Kohanim Posted December 12, 2014 Share Posted December 12, 2014 Hello everyone, This feature is coming shortly. With kind regards, Michel Link to comment
MrTinker Posted June 3, 2016 Share Posted June 3, 2016 Not to revive an old thread, but ... did something ever get implemented that would allow for easy capture of the current temp as reported by the Insteon thermostat? I'd like a program to alert me when the outside temp is the same as inside (as reported by the thermostat) and I haven't figured out a good way to do it yet. Link to comment
larryllix Posted June 4, 2016 Share Posted June 4, 2016 (edited) Not to revive an old thread, but ... did something ever get implemented that would allow for easy capture of the current temp as reported by the Insteon thermostat? I'd like a program to alert me when the outside temp is the same as inside (as reported by the thermostat) and I haven't figured out a good way to do it yet. Get v5.0.4. Piece of cake. For a sample look for the "Venstat sensor" http://forum.universal-devices.com/topic/18921-v5-averaging-using-only-the-best-values/?hl=averaging Edited June 4, 2016 by larryllix Link to comment
MrTinker Posted June 6, 2016 Share Posted June 6, 2016 How stable is v5.0.4? I haven't done anything with v5 yet. Looks like it's still alpha/beta? I should probably stay away Good to know it'll be there when I move to v5 though Link to comment
MWareman Posted June 6, 2016 Share Posted June 6, 2016 It's Alpha, not yet Beta. It's considered only appropriate for developers on their non-primary system. That being said - several appear to be running it fine. YMMV - but keep a good backup! Link to comment
Recommended Posts