50-50 Posted January 7, 2015 Posted January 7, 2015 Okay, I know someone has to have covered this before... but after a number of searches and lots of false hits.. here goes: My PLM died. Dead. Taps. Ordered new one. Delivery: Next Monday I have some functions that use programs, variables and the network module. No Insteon function at all. However, I now have no programs are running at all (the my programs folder is empty) . I can still see state variables being updated, etc. Is this by design (and if so, why?) and if not, how do I fix it between now and Monday? Is it due to 'safe mode' which is entered due to no PLM? Detail: My Autelis bridge and Dataloggers DIN rely on the network module and programs to run my heating. Having or not having a PLM is irrelevant to that automation. Thanks 50/50
Mike Ippolito Posted January 7, 2015 Posted January 7, 2015 http://isy.universal-devices.com/updates/Isy_UD994/ Pick your version.. Doesn't require PLM Sorry for brevity - posted using mobile Tapatalk
50-50 Posted January 7, 2015 Author Posted January 7, 2015 Thanks. I was running 4.2.17 when the PLM died. I just grabbed the 4.2.18 from the link above. Is this different than the "normal" firmware? Do I need to reload to "standard" when a new PLM arrives?
Teken Posted January 7, 2015 Posted January 7, 2015 Thanks. I was running 4.2.17 when the PLM died. I just grabbed the 4.2.18 from the link above. Is this different than the "normal" firmware? Do I need to reload to "standard" when a new PLM arrives? Yes, once the PLM arrives you need to load the standard firmware and follow the wiki for replacing the PLM.
50-50 Posted January 7, 2015 Author Posted January 7, 2015 Loaded 4.2.18 from this link. I'm stuck. Can not log in. ISY RX/TX lights on solid. I get the Admin Console but "File->Logon" is greyed out and all tabs are empty (Main/Program/Configuration). A little worried... http://isy.universal-devices.com/updates/Isy_UD994/Pick your version.. Doesn't require PLMSorry for brevity - posted using mobile Tapatalk
Mike Ippolito Posted January 7, 2015 Posted January 7, 2015 Please open a ticket and we'll get you going again. http://www.universal-devices.com/contact-support/
Michel Kohanim Posted January 8, 2015 Posted January 8, 2015 50-50, Unfortunately Mike gave you the wrong firmware which requires a different UI: https://isy.universal-devices.com/994/4.2.18/admin.jnlp. Note there is no i after 994. With kind regards, Michel
Recommended Posts