ldrinc Posted March 17, 2015 Share Posted March 17, 2015 After an unsuccessful attempt to restore my isy to a previous file. the red light keeps blinking and I am unable to connect to my isy. Please advise. I have done a power cycle but have not had any luck with it. Link to comment
stusviews Posted March 17, 2015 Share Posted March 17, 2015 Why are you attempting a restore? Did you replace the PLM? Link to comment
ldrinc Posted March 17, 2015 Author Share Posted March 17, 2015 Updated to the latest RC thinking that it would solve problems that I was having with "Options" not showing up on the admin console. When that didnt help I wanted to go back to the previous stable firmware. Link to comment
stusviews Posted March 17, 2015 Share Posted March 17, 2015 Remove power from the ISY. Unplug and replug the PLM. Wait a minute. Power up the ISY. What's the result? Link to comment
ldrinc Posted March 17, 2015 Author Share Posted March 17, 2015 Did that.... Same thing. Blinking Red LED Link to comment
ldrinc Posted March 17, 2015 Author Share Posted March 17, 2015 Not sure if you can identify the problem by the lights but I have 3 solid blue lights (power, rx, tx) on and 1 red flashing led dl Link to comment
Michel Kohanim Posted March 17, 2015 Share Posted March 17, 2015 Hi Idrinc, I am so very sorry to hear. Please do be kind enough to contact our support (links below). It seems that you have a corrupted file system. With kind regards, Michel Link to comment
ldrinc Posted March 18, 2015 Author Share Posted March 18, 2015 All, I have one thing to say.... FANTASTIC!!! You guys are awesome. Turns out that I had a corrupt sd card. I changed it out for a new one and restored a backup. Everything is back the way it was. Thank you very much for your prompt responses... Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.