Tom Posted March 23, 2015 Share Posted March 23, 2015 I have an ISY994 with Firmware 4.2.15. I just purchase a new MornngLinc #2458A1 module. It is REV. 1.2.1310. I am not able to add it through the ISY UI. I tried both adding it by selecting the MorningLinc specifically and tried Auto discovery. I tried putting the MorningLinc in linking mode by holding the set button for 5 seconds. The LED blinks but only about 3 times. Every time I try to add it I get the error "Cannot determine Insteon Engine". I see that firmware 4.2.18 is available but I am reluctant to upgrade unless I know that the new version supports MorningLinc better. I have another MorningLinc that works fine. I upgraded from an ISY99 to the ISY994 this older MorningLinc device came over with the upgrade. Any help is appreciated. Tom Link to comment Share on other sites More sharing options...
LeeG Posted March 23, 2015 Share Posted March 23, 2015 Follow these Wiki instructions for adding a MorningLinc http://wiki.universal-devices.com/index.php?title=ISY-99i/ISY-26_INSTEON:Linking_a_MorningLinc Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.