Global Cache IP2SL

[ldrinc]

Can someone help me with the command structure(syntax) for issuing an RS232 command via the ISY.  I already have the ISY994i with the networking module installed and I know how to create the resource but not so sure what to use to execute the command (http, tcp, etc).  Any help would be appreciated.

 

The device that I am trying to control is my Key Digital Matrix Switch.  When I set up the GC IP2SL  the manufacturer suggests that the following settings be applied: 

 

» Baud rate: 57,600

» Data Bits: 8

» Parity: None

» Stop Bits: 1

» Flow Control: None

» Carriage Return: Required

» Line Feed: Required

 

The command that I would like to use to create an ISY resource for will switch Output 3 to Input 1.  The command that I should use is SPO01SI03.  How do I write this command in the isy resource?

 

 

 

 

[Michel Kohanim]

Hi ldrinc,

 

You must use TCP. This said, Have you verified that you can communicate with your switch through IP2SL?

 

With kind regards,

Michel

[jtara92101]

Here's an example from my setup.

 

sendir,1:1,1,38000,1,1,342,171,21,21,21,64,21,64,21,21,21,21,21,21,21,21,21,21,21,64,21,21,21,21,21,64,21,64,21,64,21,64,21,64,21,64,21,21,21,21,21,21,21,21,21,21,21,21,21,21,21,21,21,64,21,64,21,64,21,64,21,64,21,64,21,64,21,1518,342,86,21,3655\r\n

 

Heck if I can remember what this means or how I came up with this! Mode is C-Escaped.

 

This switches an SR-22 A/B speaker switch an IP2IR.

 

OK, this is an IR command, which is why it is so long and painful. You've got it easy! You probably just want URL-encoded.