ldrinc Posted May 17, 2015 Share Posted May 17, 2015 I am having trouble creating a resource for powering on/off my KD 4x4 Matrix Switcher. Can anyone help me with how to setup and format the command in the resource. attached are some particulars from the KD manual. Also, I am using a Global Cache Itach IP2SL to transmit the command via the ISY. I have setup the IP2SL with the following parameters. Baud rate: 57,600Data Bits: 8Parity: NoneStop Bits: 1Flow Control: NoneCarriage Return: Required Following is the network resource that I have created. TCP 192.168.1.16 Port = 4999 timeout = 500 ms C-Escaped Body = PF\r\n Actual = PF The error in the ISY log is as follow: [TCP-Conn] -1/-140002, Net Module Rule: 226 What am I missing? Link to comment
Michel Kohanim Posted May 17, 2015 Share Posted May 17, 2015 Hi ldrinc, -140002 = connection timed out (http://wiki.universal-devices.com/index.php?title=ISY-99i/ISY-26_INSTEON:Errors_And_Error_Messages#System_Errors) . You might want to try and increase the timeout OR make sure that the port/IP are correct. With kind regards, Michel Link to comment
ldrinc Posted May 17, 2015 Author Share Posted May 17, 2015 ok, I figured it out everything works as it should. Here is what I did. The settings for the IP2SL should be as follows. Serial Parameters : Multiple Ports Enabled Baud Rate 57.600 Flow Control None Stop Bits 1 Parity None Data Bits 8 Frame Errors "0" Parity Errors "0" Overflow Errors "0" Previously, I had "Multiple Ports" disabled Link to comment
Scottmichaelj Posted May 21, 2015 Share Posted May 21, 2015 What am I missing? An RTI remote system in your home with an XP Processor I find this best handled on the remote side not the ISY side making it a cleaner and more stable connection. Also FWIW I have a lot of experience with SnapAV Matrix Switches, so wanted to point out if there is a power outage on the Matrix Switch then you may need to reboot the ISY and the Matrix switch sometimes doesn't "disconnect" properly on loss of power. Sometime to test and try to make sure if all works. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.