Michel Kohanim Posted December 7, 2008 Posted December 7, 2008 Hello me23, No, unfortunately not. With kind regards, Michel Any plans to support this unit?
me23 Posted December 7, 2008 Author Posted December 7, 2008 Oh, that's too bad. It's a much superior unit to the IRLinc.
Michel Kohanim Posted December 7, 2008 Posted December 7, 2008 Hello me23, I would agree. I do feel the pain SHN must be feeling being dependent on the PLM from SH as we are having a hell of a time supporting anything SHN as soon as SH comes up with new PLM firmware. It's truly sad. With kind regards, Michel Oh, that's too bad. It's a much superior unit to the IRLinc.
steve4609 Posted January 28, 2009 Posted January 28, 2009 Since EZUIRT is not supported, is there any way to send Insteon signals and generate IR commands? This is the missing link so that our home theater can be used when i am not home or busy. Thanks.
MikeB Posted January 28, 2009 Posted January 28, 2009 Universal Devices is working on a native IR transmitter for the ISY. Also, Smarthome's IR transmitter is soon to be released: http://www.techmall.com/topic.asp?TOPIC_ID=4957
Gentstr Posted June 11, 2009 Posted June 11, 2009 I understand that having the ability to receive and/or transmit IR codes isn't supported, but is there at least minimal support of the device? For example, I don't mind manually linking with an IR code, but I would need to have the ISY trigger if certain groups are linked. If there is absolutely no way for the ISY to even perform basic trigger support with the EZUIRT, then I cannot justify the purchase.
Michel Kohanim Posted June 12, 2009 Posted June 12, 2009 Gentstr, Unfortunately we do not have any plans whatsoever in supporting EZUIRT. We shall support IRLinc Transmitter though in our release 3.0. With kind regards, Michel I understand that having the ability to receive and/or transmit IR codes isn't supported, but is there at least minimal support of the device? For example, I don't mind manually linking with an IR code, but I would need to have the ISY trigger if certain groups are linked. If there is absolutely no way for the ISY to even perform basic trigger support with the EZUIRT, then I cannot justify the purchase.
carealtor Posted February 13, 2012 Posted February 13, 2012 Is EZUIRT still a no go? My EZUIRT and IR remotes are an integral part of my Insteon system and I was really disheartened to find it not supported after purchasing my ISY. Is there at least a way to get the links into the ISY database so they aren't overwritten?
kevkmartin Posted February 13, 2012 Posted February 13, 2012 Look into a Global Cache iTach IP2IR device (or WiFi2IR) It sits on your network, and will transmit IR signals in response to IP commands. You can use the NETWORK RESOURCES in the ISY to send the IP commands. It takes a bit of work to set up, but it works well.
Recommended Posts