ArunGupta2014 Posted November 6, 2015 Posted November 6, 2015 I recently got two Everspring ON/OF modules AN163-1. They keep generating entries like following in the event log. Fri 11/06/2015 06:41:46 PM : [ ZW013_143] ST 600 (uom=73 prec=2)Fri 11/06/2015 06:42:45 PM : [ ZW013_143] ST 700 (uom=73 prec=2)Fri 11/06/2015 06:43:15 PM : [ ZW013_143] ST 600 (uom=73 prec=2)Fri 11/06/2015 06:43:45 PM : [ ZW013_143] ST 700 (uom=73 prec=2) Is this normal? I have not seen any other ON/OFF module generating so much information. Thanks, Arun
andyf0 Posted November 7, 2015 Posted November 7, 2015 It's reporting Wattage being used, looks like every 30 secs. prec=2 means divide the number by 100 so it's reporting 6 Watts and 7 Watts being used.
ArunGupta2014 Posted November 7, 2015 Author Posted November 7, 2015 Thanks much Andy...!! These are the only two ON/OFF modules which report power consumption and I totally overlooked that feature.
ArunGupta2014 Posted November 11, 2015 Author Posted November 11, 2015 Sorry to reopen this topic. I noticed that these two module keep generating this type of traffic even when they are off: Wed 11/11/2015 11:37:53 AM : [ZWAVE-RX ZW013_1] [01100004000D0A32]...Wed 11/11/2015 11:37:53 AM : [ZWAVE-TX ] ACKWed 11/11/2015 11:38:02 AM : [ZWAVE-RX ZW012_1] [01100004000C0A32]...Wed 11/11/2015 11:38:02 AM : [ZWAVE-TX ] ACKWed 11/11/2015 11:38:23 AM : [ZWAVE-RX ZW013_1] [01100004000D0A32]...Wed 11/11/2015 11:38:23 AM : [ZWAVE-TX ] ACKWed 11/11/2015 11:38:32 AM : [ZWAVE-RX ZW012_1] [01100004000C0A32]...Wed 11/11/2015 11:38:32 AM : [ZWAVE-TX ] ACKWed 11/11/2015 11:38:52 AM : [ZWAVE-RX ZW013_1] [01100004000D0A32]...Wed 11/11/2015 11:38:52 AM : [ZWAVE-TX ] ACKWed 11/11/2015 11:39:02 AM : [ZWAVE-RX ZW012_1] [01100004000C0A32]...Wed 11/11/2015 11:39:02 AM : [ZWAVE-TX ] ACKWed 11/11/2015 11:39:22 AM : [ZWAVE-RX ZW013_1] [01100004000D0A32]...Wed 11/11/2015 11:39:22 AM : [ZWAVE-TX ] ACKWed 11/11/2015 11:39:32 AM : [ZWAVE-RX ZW012_1] [01100004000C0A32]...Wed 11/11/2015 11:39:32 AM : [ZWAVE-TX ] ACK Is this normal? Thanks, Arun
Michel Kohanim Posted November 12, 2015 Posted November 12, 2015 Hi Arun, Yes. It's reporting change of state. With kind regards, Michel
ArunGupta2014 Posted November 12, 2015 Author Posted November 12, 2015 Michel, Thanks for the reply. Pardon me, but I am a newbie to Z-wave. I have 12 other Z-wave devices but they do not generate any such traffic. Is there something special about these two modules? Thanks, Arun
Michel Kohanim Posted November 12, 2015 Posted November 12, 2015 Hi Arun, What are they? With kind regards, Michel
ArunGupta2014 Posted November 12, 2015 Author Posted November 12, 2015 These are Everspring ON/OF modules AN163-1. I just have 2 of these. Even when they are totally OFF, they keep generating this kind of traffic. Thanks, Arun
Michel Kohanim Posted November 13, 2015 Posted November 13, 2015 Hi Arun, I am not sure why they would do that at all. With kind regards, Michel
KeviNH Posted January 19, 2017 Posted January 19, 2017 Just wondering, does the watt meter reading from the Everspring AN163 appear as a node, or only in the logfile? I'm looking for an appliance module which will report current watt draw,, and has good ISY support on v4.5.4 release.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.