New Insteon Heat Pump Thermostart

[mykanderson]

I finally got my thermostat! I added it to my ISY and all looked good. I was able to manually control the thermostat thru the admin console. But the two issues I have are:

I can't control it thru programs.

The thermostat shows no status in MobiLinc.          

[stusviews]

I can't control it thru programs.

 

That's somewhat vague. What specifically are you trying to do? What have you tried?

 

Here's a few of my programs:

Turn on cooling

If

        Control 'BR / Devices / BRR HVAC.1 Heat-Zone 2 Off / BRR HVAC.3 Cool-Zone 1 Off' is switched On

 

Then

        Set 'BR / Devices / BR Thermostat Main' 76° (Cool Setpoint)

        Set 'BR / Devices / BR Thermostat Main' Mode Cool

 

Else

   - No Actions - (To add one, press 'Action')

 

Turn the thermostat down 1º

If

        Control 'BR / Devices / BRR HVAC.1 Heat-Zone 2 Off' is switched Dim

     Or Control 'BR / Devices / BRR HVAC.1 Heat-Zone 2 Off / BRR HVAC.3 Cool-Zone 1 Off' is switched Dim

 

Then

        Set 'BR / Devices / BR Thermostat Main' Setpoint Down 1°

 

Else

   - No Actions - (To add one, press 'Action')

 

Turn the thermostat off

If

        Control 'BR / Devices / BRR HVAC.1 Heat-Zone 2 Off' is switched Off

 

Then

        Set 'BR / Devices / BR Thermostat Main' Mode Off

 

Else

   - No Actions - (To add one, press 'Action')

 

 

In each case, the trigger is a RemoteLinc button.

 

I can't help you with MobiLinc, but Wes can: http://forum.univers...um/35-mobilinc/

 

I can add that all my Insteon thermostats are fully functional in MobiLinc.

[mykanderson]

When ever I try to do any programs with it I do not get thermostat option. The options I get are the options you would get if you're trying to program a dimmer switched.

 

Sent from my SCH-I545 using Tapatalk

[rebirth24]

Has this been resolved? I am having the same issue when it comes to my ISY treating the thermostat as if it is a light rather than a thermostat when it comes to programming?

[Michel Kohanim]

Hi rebirth24,

 

Please makes sure you have UI version 4.4.2.

 

With kind regards,

Michel

[rebirth24]

Hi rebirth24,

 

Please makes sure you have UI version 4.4.2.

 

With kind regards,

Michel

Definitely have.

[Michel Kohanim]

Hi rebirth24,

 

Thank you. Please go to http://your-isy-ip-address/rest/nodes, save, and send it to support@universal-devices.com and highlight the thermostat node.

 

With kind regards,

Michel

[rebirth24]

Hi rebirth24,

 

Thank you. Please go to http://your-isy-ip-address/rest/nodes, save, and send it to support@universal-devices.com and highlight the thermostat node.

 

With kind regards,

Michel

Sent.