Monitoring and Programming Schlage

[klebel]

Hi All,

 

Based on your recommendations I picked up the Schlage BE469.  Nice lock!  I really like it so far.  With a little experience with it now, there are some interesting things I am trying to figure out.  If I add the lock to a program, the only things I can do are Lock, Unlock and Query the deadbolts.  BUT if I just highlight the deadbolt and click the Options button I have access to lots of the settings (such as Autolock, Code Length, Alarm Mode) that I can configure but I can't make those changes programmatically it seems.  For instance, I like the autolock feature but I only want it enabled when I am outside the "Home" geofence.  Its a pain in the rear to have it on when I am going in and out of the house a lot during the day and it autolocks after 30 seconds.  Has anyone figured out how to make the configuration changes to the lock via a program yet?

 

Last I would like to track and log WHICH door codes are being used.  The Schlage Sense locks offer this option.  I am not seeing a way to do it with the Schlage BE469 which is the Schlage Connect line.  Any ideas on this one?

 

Thanks!

 

Kerry

[stusviews]

Under Options (you may have to wait), select Auto Re-lock off. Wait. You may also need to heal network after each change. For security the codes are not exposed. I use only the ISY Z-Wave module, not Schlage Connect.

[MikeD]

You can use something like my 'SchlageTimeout' program and set whatever timeout period you like. I use a 10 minute timeout period.

http://forum.universal-devices.com/topic/14677-schlage-be469/?p=123297

 

~Mike

[klebel]

Awesome MIke.  I followed some of your program logic and get the timers for the door locks all setup.  I would like to understand how you do logging and notifications though.  I have Users 1-4 setup now exactly the same on the front and rear door locks.  If I am away from the house I would like to get a text notification if someone unlocks one of the does and which user's code was used.  Is this possible?  Any idea how to do it?

 

Thanks!

[MikeD]

For logging you can use ISYLogger. http://forum.universal-devices.com/forum/61-isylogger/

 

If you have an iPhone you can use Prowl for notifications. For a history you can run the Prowl app. This is what it looks like on an iPhone.

 

It requires the ISY Network Module. I have created a separate resource for every notification, each called by their respective program.

 

I believe Tasker is the equivalent for android.

 

~Mike

[klebel]

Yup Im screwed.  Im not a web services guy.  I was just hoping there was some easy way to setup a variable like you mentioned in the earlier post.  I'm trying to understand how you are populating those two variables.

iSchlageUnLockedBy
---------------------
999 = Tamper Alarm
 55 = Insteon Keypad
  0 = Manually UNLOCKED
  1 = Mary
  2 = Michael
  3 = Janet
  4 = Tina
  5 = Joe
  6 = Alice

iSchlageLockedBy
------------------------------------
999 = Tamper Alarm
  0 = Reset when UNLOCKed by Keypad or Manually UNLOCKED
  1 = Manually LOCKED from inside
  2 = LOCKED by Outside Schlage button
  3 = LOCKED by Insteon Keypad
  4 = LOCKED by KPLAllOffButton Program 
555 = LOCKED by SchlageTimeout Program

Edited February 3, 2016 by klebel

[MikeD]

The variables are based on what the Schlage lock is sending and are set in programs. The first program (shown below) shows that when the Schlage Lock has a Status of 'Access Code 1' and is 'Unlocked by Keypad' then the integer variables $i.SchlageLockedBy is cleared to zero, $i.SchlageUnLockedBy is set to 1 (Mary), the Scene for my KPL buttons is turned On, and the Resource 'SchlageMary' (shown in above post) is called.

SchlageMary - [ID 0073][Parent 0076]

If
        Status  '.Z-Wave / ZW 006 Schlage Door Lock' is Access Code 1
    And Control '.Z-Wave / ZW 006 Schlage Door Lock' is switched Unlocked by Keypad
 
Then
        $i.SchlageLockedBy  = 0
        $i.SchlageUnLockedBy  = 1
        Set Scene 'Scenes / SchlageButton-A' On
        Resource 'SchlageMary'
         
Else
   - No Actions - (To add one, press 'Action')
 

The same method is use throughout the programs. I added a period between '$i' and the variable name since posting those programs to define the type of variable.

 

Hope this explanation helps.

 

~Mike

[klebel]

Mike that was very helpful.  Thanks!  One last question.  The variables for $i.SchlageLockedBy and $i.SchlageUnLockedBy are integer variables. How are you translating that to a family member name in your notifications?

[MikeD]

See the second screenshot in post #5. Individual programs call individual notifications added in the Network Module / Resource Editor. I consolidated all my Schlage lock programs in one folder.

 

~Mike