Step by step instructions?

[automationjim]

I am trying to setup my ISY and one lamplinc device:

 

Are there any step by step instructions on how to do this? I mean something that covers a whole system line maybe a device, controller, power supply, access points and admin console. What order to attach everything and when to link?

 

Here is what I did:

 

I am able to see the controller on the network. Let tell you the sequence that I followed to try to get a lamplinc connected.

 

1. Connected the ISY to the router with supplied cable.

2. Connected the ISY to the PLM

3. Plugged in both access points

4. Set admin/controller to link

5. Plugged in Lamplinc and set it per instructions

 

I never saw anything in the admin tool except an error when it tried to link to the lamplinc.

 

I get an error message "Discovering nodes; Retry?"

 

Am I doing something wrong?

 

Thanks

Jim!!

[Michel Kohanim]

Hello Jim,

 

Apologies for the inconvenience.

 

I am sure you have already done all the steps outlined here:

http://www.universal-devices.com/mwiki/ ... tart_Guide

 

And, here's the step by step instruction on adding devices:

http://www.universal-devices.com/mwiki/ ... g_a_Device

 

I do recommend the perusal of the links here as well:

http://www.universal-devices.com/mwiki/ ... w-To_Guide

 

With kind regards,

Michel

I am trying to setup my ISY and one lamplinc device:

 

Are there any step by step instructions on how to do this? I mean something that covers a whole system line maybe a device, controller, power supply, access points and admin console. What order to attach everything and when to link?

 

Here is what I did:

 

I am able to see the controller on the network. Let tell you the sequence that I followed to try to get a lamplinc connected.

 

1. Connected the ISY to the router with supplied cable.

2. Connected the ISY to the PLM

3. Plugged in both access points

4. Set admin/controller to link

5. Plugged in Lamplinc and set it per instructions

 

I never saw anything in the admin tool except an error when it tried to link to the lamplinc.

 

I get an error message "Discovering nodes; Retry?"

 

Am I doing something wrong?

 

Thanks

Jim!!