Why does my scene not work properly?

[peedeevee]

I have a scene that I am trying to get working properly.  It consists of

 

controller - Keypadlinc 6 - button D

responders - keypadlinc dimmer - load

                     regular dimmer

                     on/off module (non-dimmable lamp  plugged into on/off module)

 

The scene is set so that the keypadlinc dimmer is set for 32%, the regular dimmer for 50% and the on/off module to 0% - I want that light off in this scene.

 

When I test it from ISY it works properly.  The scene responders dim and the on/off turns off.  

 

But when I use it from the kepadlinc the on/off module turns on.

 

I finally removed it from the scene because I could not figure it out.

 

peedeevee

 

[MWareman]

When you set scene on levels, you are setting only that controller - the ISY by default.

 

You will need to copy the on levels to other scene controllers. I'm away from my system currently, and am currently unable to remember the specifics though. I think you would select your KPL within the scene.

[peedeevee]

That did the trick.  

 

Thank you for your help.

 

peedeevee

[DavidS]

This helped me too...thanks MWareman!

 

I took this screenshot in case anyone has trouble understanding where this is set.  FR KPL - Button A is the controller for scene Family Room Normal.  Select the controller button FR KPL - Button A and then click the Copy Scene Attributes From... button to set the levels that will be applied to the responders when the controller button is pushed.  This will copy the responder dim level settings from the defined scene.

 

 

DavidS

Edited August 20, 2016 by DavidS