Authentication Error

[jasongolod]

Tried searching here and on Google but I am getting a authentication error after I add my login creds for a Honeywell thermostat. 

 

2016-06-27 04:17:02 - ISY NodeLink Server v0.5.4 started
2016-06-27 04:17:04 - Web config server started (http://192.168.10.xxx:8090)
2016-06-27 04:17:04 - ISY resolved to 192.168.10.xxx
2016-06-27 04:17:06 - ISY Error: Duplicate node names exist on the ISY (Powerlinc USB Modem - Server.)
2016-06-27 04:17:06 - ISY Error: Duplicate node names exist on the ISY (Powerlinc USB Modem - Server.)
2016-06-27 04:17:06 - ISY Error: Duplicate node names exist on the ISY (Powerlinc USB Modem - Server.)
2016-06-27 04:17:06 - ISY Error: Duplicate node names exist on the ISY (Powerlinc USB Modem - Server.)
2016-06-27 04:17:06 - ISY Error: Duplicate node names exist on the ISY (Powerlinc USB Modem - Server.)
2016-06-27 04:17:06 - ISY Error: Duplicate node names exist on the ISY (Powerlinc USB Modem - Server.)
2016-06-27 04:17:06 - ISY Error: Duplicate node names exist on the ISY (Powerlinc USB Modem - Server.)
2016-06-27 04:17:06 - ISY Error: Duplicate node names exist on the ISY (Honeywell)
2016-06-27 04:17:10 - TCC Login Error: Error getting response stream (Write: The authentication or decryption has failed.): SendFailure [honeywell]
2016-06-27 04:17:10 - TCC Get Error: Error getting response stream (Write: The authentication or decryption has failed.): SendFailure [honeywell]
2016-06-27 04:22:34 - TCC: Please enter login info [honeywell]
2016-06-27 04:23:03 - TCC Login Error: Error getting response stream (Write: The authentication or decryption has failed.): SendFailure [honeywell]
2016-06-27 04:23:03 - TCC Login:  [honeywell]
2016-06-27 04:23:03 - TCC Get Error: Error getting response stream (Write: The authentication or decryption has failed.): SendFailure [honeywell]
2016-06-27 04:23:03 - TCC Data:  [honeywell]

 

I am running this on a RPI. 

 

Thanks,

 

Jason

 

[io_guy]

What version of mono?

Can you try this on a Windows machine to see if it works (my be an SSL certificate store issue with Linux)?

You can just copy your exe and XML to Windows.

[io_guy]

Cancel that, just wait till version 0.5.5 .  It looks like I didn't include the SSL management on the module.

[jasongolod]

First of all...thanks for putting all of this effort into all of the software you have written and distributed...amazing.

 

Runs fine on windows.  Thanks.

 

I have been monkeying with the PI this morning.   Looks like the ca certificates need updating.  If I connect to Honeywell and specify the certificate directory then it connects fine.  I tried to install the ca-certificates-mono package, but it doesn't exist for Jessie...so, I am in the middle of trying a dist upgrade on the Pi to see if I can get it to work. 

 

Thanks again for all of your generosity and work on all of this stuff.  Awesome.

 

-Jason

[io_guy]

It's my bad, I don't auto-accept the certificate.

It works on Windows because Windows has a cert store to handle this, other OS' do not.

There are ways to handle this in Linux but I'll cut a new version to do it within NodeLink. I forgot to add a couple lines of code.

[lsibarra]

Hi,

I need help on getting the Honeywell Thermostat working in Nodelink. I entered my credentials correctly (verified it by logging in https://mytotalconnectcomfort.com/portal) but the nodelink log is returning:

 

TCC Login Error: The request timed out[hwstat1]

 

Do yo have any idea why this is happening?

 

Larry

[larryllix]

Hi,

I need help on getting the Honeywell Thermostat working in Nodelink. I entered my credentials correctly (verified it by logging in https://mytotalconnectcomfort.com/portal) but the nodelink log is returning:

 

TCC Login Error: The request timed out[hwstat1]

 

Do yo have any idea why this is happening?

 

Larry

NodeLink requires ISY v5.xxx

[lsibarra]

Hi,

I upgraded my firmware for the ISY994 to v 5.0.2

 

Larry

[lsibarra]

Hi,

I ran the nodelink in a windows 10 PC and setup the honeywell tstat device. I did not get the TCC Login Error and was able to get the current status state of my thermostat in my ISY. However, I am unable to query or change temps/schedule in ISY. I kept getting TCP client request failed. 

 

Do any of you have an idea why I am getting this error and why I am unable to change any setting in Honeywell Tstat within ISY?

 

Thanks you for all the help you can provide.

 

Larry

[Michel Kohanim]

Hi Larry,

 

If you are still on 5.0.2, you definitely need to upgrade to more recent versions of 5.0.x (staring with 5.0.4). The certificate for 5.0.2 has expired.

 

With kind regards,

Michel

[lsibarra]

Hi Michel,

Thank you so much for getting back to me. I will check out v5.0.4. Thanks again for your feedback.

 

Larry