xyzsal1 Posted September 1, 2017 Share Posted September 1, 2017 I have an Insteon Mini Remote 2342-2. The device address is worn off the back making it barely readable. I am wanting to link the remote to my ISY but don't know how to add it without being able to read the device address. Any Ideas? Link to comment
paulbates Posted September 1, 2017 Share Posted September 1, 2017 Hi and welcome to the UDI formums! You can try the Start Linking option at the top of the Link Management Menu, and then put the remotelinc in linking mode. I've not specifically tried that with a remotelinc, but it wouldn't take long to find out if it works. Paul Link to comment
xyzsal1 Posted September 1, 2017 Author Share Posted September 1, 2017 Ok I will try that. I was under the impression that all RF devices like Remotes and Motion Sensors, had to be added manually? Link to comment
Brian H Posted September 1, 2017 Share Posted September 1, 2017 Well you have to wake them up from their power saving mode. Part of the process is manually activating the Link Push Button. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.