dobenland Posted January 3, 2018 Share Posted January 3, 2018 I’m trying to link a button on a new Mini Remote (8 Scene model 2342-222) to a scene for Kitchen Lights. Kitchen Lights is a scene with a 3-way switch set-up. Kit-A and Kit-B are Icon On/Off Switches (one on either side of the kitchen). Kit-A & Kit-B are both working so I know the wiring is OK. Kit-A & Kit-B are linked to an old RemoteLinc (model 2440) and this works. My ISY994-I doesn’t recognize the old RemoteLinc. ISY does recognize the new Mini Remote and I have successfully linked several buttons to single responder devices. I can add one of the Mini Remote buttons to the Kitchen Lights scene but when I press the button, the kitchen lights do not go on. The ISY shows that all 3 (both Kit-A & Kit-B and the Mini Remote) are on. Please help me … I’m losing my mind. Link to comment
stusviews Posted January 3, 2018 Share Posted January 3, 2018 The Mini Remote, like most battery powered devices, can only be a controller, never a responder. It will always be in the last state sent no matter what other devices in the same do. Not even a program can change that. Link to comment
dobenland Posted January 4, 2018 Author Share Posted January 4, 2018 Thanks for your reply ... Yes, I understand that the Mini Remote can only be a controller ... and that is how it is linked in the ISY. I have a similar scene for the Dining Room, but instead of the Icon On/Off switches I have Icon Dimmer switches. Adding a button from the Mini Remote to the Dining Room scene works. Pressing the button on the Mini Remote will correctly operate the Dining Room scene. The Icon On/Off switches in the Kitchen scene are model 2876SB Ver 4.2. The Icon Dimmer switches in the Dining Room scene are model 2876DB Ver 4.35. I just don't understand why the Mini Remote works the Dining Room scene and not the Kitchen scene. Link to comment
paulbates Posted January 4, 2018 Share Posted January 4, 2018 Hi, and welcome to the UDI forums! I know you said it shows that they are on, but how are they set in the scene.... its possible (and happens) that the scene commands "on" at 0%. Click on the scene and see what the on level is Pau Link to comment
dobenland Posted January 4, 2018 Author Share Posted January 4, 2018 On Level is 100% for both Kitchen scene and Dining Room scene. I ran a scene test for both scenes but cannot upload the .txt files so I will paste them below. Note: 1) Kitchen button on Mini Remote does NOT turn Kitchen lights on or off 2) Dining Room button on Mini Remote does turn Dining Room lights on and off. Kitchen scene test: Wed 01/03/2018 07:37:56 PM : [GRP-RX ] 02 61 12 13 00 06 Wed 01/03/2018 07:37:57 PM : [iNST-SRX ] 02 50 11.2C.B4 49.94.48 66 13 12 LTOFFRR(12) Wed 01/03/2018 07:37:57 PM : [std-Cleanup Ack] 11.2C.B4-->ISY/PLM Group=0, Max Hops=2, Hops Left=1 Wed 01/03/2018 07:37:57 PM : [iNST-SRX ] 02 50 11.2C.B4 49.94.48 62 13 12 LTOFFRR(12) Wed 01/03/2018 07:37:57 PM : [std-Cleanup Ack] 11.2C.B4-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 <html><font color="red">----- Kitchen Test Results -----</font></html> <html><font color="red">[succeeded]</font> KIT A (11 2C B4 1)</html> <html><font color="red">[Failed]</font> KIT B (11 28 D7 1)</html> <html><font color="red">[ignore]</font> Remote - C (44 8C EC 4)</html> <html><font color="red">----- Kitchen Test Results -----</font></html> Wed 01/03/2018 07:38:06 PM : [iNST-TX-I2CS] 02 62 44 8C EC 1F 2F 00 00 02 0F AF 08 E2 03 04 69 30 01 00 03 83 Wed 01/03/2018 07:38:06 PM : [iNST-ACK ] 02 62 44.8C.EC 1F 2F 00 00 02 0F AF 08 E2 03 04 69 30 01 00 03 83 06 (00) Wed 01/03/2018 07:38:15 PM : [iNST-TX-I2CS] 02 62 44 8C EC 1F 2F 00 00 02 0F AF 08 E2 03 04 69 30 01 00 03 83 Wed 01/03/2018 07:38:15 PM : [iNST-ACK ] 02 62 44.8C.EC 1F 2F 00 00 02 0F AF 08 E2 03 04 69 30 01 00 03 83 06 (00) Wed 01/03/2018 07:38:19 PM : [44 8C EC 1 ] Link 10 : 0FA8 [E203046930010003] *Failed Writing [E203046930010003] Wed 01/03/2018 07:38:51 PM : [iNST-SRX ] 02 50 11.2C.B4 00.00.01 CB 11 00 LTONRR (00) Wed 01/03/2018 07:38:51 PM : [std-Group ] 11.2C.B4-->Group=1, Max Hops=3, Hops Left=2 Wed 01/03/2018 07:38:51 PM : [D2D EVENT ] Event [11 2C B4 1] [DON] [0] uom=0 prec=-1 Wed 01/03/2018 07:38:51 PM : [ 11 2C B4 1] DON 0 Wed 01/03/2018 07:38:51 PM : [D2D EVENT ] Event [11 2C B4 1] [sT] [255] uom=0 prec=-1 Wed 01/03/2018 07:38:51 PM : [ 11 2C B4 1] ST 255 Wed 01/03/2018 07:38:51 PM : [D2D EVENT ] Event [11 28 D7 1] [sT] [255] uom=0 prec=-1 Wed 01/03/2018 07:38:51 PM : [ 11 28 D7 1] ST 255 Wed 01/03/2018 07:38:52 PM : [iNST-SRX ] 02 50 11.2C.B4 49.94.48 41 11 01 LTONRR (01) Wed 01/03/2018 07:38:52 PM : [std-Cleanup ] 11.2C.B4-->ISY/PLM Group=1, Max Hops=1, Hops Left=0 Wed 01/03/2018 07:38:52 PM : [iNST-DUP ] Previous message ignored. Dining Room scene test: Wed 01/03/2018 07:32:31 PM : [GRP-RX ] 02 61 14 13 00 06 Wed 01/03/2018 07:32:32 PM : [iNST-SRX ] 02 50 11.25.43 49.94.48 6B 13 14 LTOFFRR(14) Wed 01/03/2018 07:32:32 PM : [std-Cleanup Ack] 11.25.43-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 <html><font color="red">----- Dining Room Test Results -----</font></html> <html><font color="red">[Failed]</font> DINRM B (11 22 4D 1)</html> <html><font color="red">[ignore]</font> Remote - H (44 8C EC 7)</html> <html><font color="red">[succeeded]</font> DINRM A (11 25 43 1)</html> <html><font color="red">----- Dining Room Test Results -----</font></html> Wed 01/03/2018 07:32:39 PM : [iNST-ACK ] 02 62 00.00.14 CF 13 00 06 LTOFFRR(00) Wed 01/03/2018 07:32:39 PM : [Ext MH ] Unexpected Ack imCmd=62 cmd1=LTOFFRR 0x13 Wed 01/03/2018 07:32:41 PM : [iNST-TX-I2CS] 02 62 44 8C EC 1F 2F 00 00 02 0F AF 08 E2 03 04 69 30 01 00 03 83 Wed 01/03/2018 07:32:41 PM : [iNST-ACK ] 02 62 44.8C.EC 1F 2F 00 00 02 0F AF 08 E2 03 04 69 30 01 00 03 83 06 (00) Wed 01/03/2018 07:32:50 PM : [iNST-TX-I2CS] 02 62 44 8C EC 1F 2F 00 00 02 0F AF 08 E2 03 04 69 30 01 00 03 83 Wed 01/03/2018 07:32:50 PM : [iNST-ACK ] 02 62 44.8C.EC 1F 2F 00 00 02 0F AF 08 E2 03 04 69 30 01 00 03 83 06 (00) Wed 01/03/2018 07:32:54 PM : [44 8C EC 1 ] Link 10 : 0FA8 [E203046930010003] *Failed Writing [E203046930010003] Link to comment
paulbates Posted January 4, 2018 Share Posted January 4, 2018 The errors seem to be for the link associated with the button? Three basic things to try Put the remotelinc in link mode (hold its set button down for 3 seconds / beep), and do a restore device? If that doesn't work, try a restore device on the kitchen switches If that doesn't work, they are older switches, factory reset the switches, then restore device (you don't need to delete or re-add them in the ISY) Pau Link to comment
dobenland Posted January 4, 2018 Author Share Posted January 4, 2018 Thank you very much ... the restore device on the kitchen switches worked. Now the Mini Remote is successfully controlling the kitchen lights. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.