drprm1 Posted August 2, 2018 Share Posted August 2, 2018 This message keeps popping up. I have 5.0.13A firmware and UI. Using the new Zwave dongle. I’ve restarted ISY and AC. Cleared java cache. No joy... i cant even save a program because this keeps popping up. Thanks for the help, Also getting this occasionally Link to comment
Michel Kohanim Posted August 3, 2018 Share Posted August 3, 2018 HI @drprm1, I responded to your ticket. With kind regards, Michel Link to comment
Teken Posted August 4, 2018 Share Posted August 4, 2018 Good to know others are seeing the TOS appear. What is causing this to happen and how do we resolve this issue??Sent from my iPhone using Tapatalk Link to comment
Michel Kohanim Posted August 5, 2018 Share Posted August 5, 2018 Hi Teken, Haven't heard back. With kind regards, Michel Link to comment
drprm1 Posted August 5, 2018 Author Share Posted August 5, 2018 Michel, No big deal but I never saw a response on my ticket. I know you responded but I’m not sure what email it went to. I responded about not getting a response via the support ticket page twice but it kept timing out and I couldn’t tell if the message was being sent. I simply stopped because I didn’t want to pester you while you’re working on the device mentioned in “where to next”.!!! On further digging I read to check cables and network switches between my ISY and router. I verified all cables were fine. My ISY was wired behind two switches so I ran a new dedicated cable back to my router....Haven’t had any error messages since. ?? Link to comment
drprm1 Posted August 5, 2018 Author Share Posted August 5, 2018 Of course I spoke too soon. Getting the messages again. Grrrrr Link to comment
Michel Kohanim Posted August 5, 2018 Share Posted August 5, 2018 @drprm1, Please check your junk mail. Also, why would you have time outs for sending emails? The bottom line is that it seems that you might have a program running in an infinite loop. If you can login, check your programs. With kind regards, Michel Link to comment
drprm1 Posted August 5, 2018 Author Share Posted August 5, 2018 I checked junk mail the other day and saw nothing. I was thinking maybe I put in the email incorrectly....I’m saying that on the support ticket page that it never showed that my message made it through and no buttons would respond. It looked like it was stuck or it had timed out. I have no time outs on my email. Thanks for telling me what to check! Link to comment
Michel Kohanim Posted August 6, 2018 Share Posted August 6, 2018 @drprm1, Ok, thank you. Please keep us posted. With kind regards, Michel Link to comment
asbril Posted August 6, 2018 Share Posted August 6, 2018 On 8/2/2018 at 4:27 PM, drprm1 said: This message keeps popping up. I have 5.0.13A firmware and UI. Using the new Zwave dongle. I’ve restarted ISY and AC. Cleared java cache. No joy... i cant even save a program because this keeps popping up. Thanks for the help, Also getting this occasionally Very coincidentally when reading this post of drprm1, I had the same message popping up as well. It happens occasionally but does not appear to interfere with my ISY's operations. I also frequently get pop-ups about communications being lost with a specific device (not always the same devices) when in fact those devices keep working. This started after installing the 5.0.13b and the new Zwave board. As I mentioned above, my ISY works fine and these messages are just annoying as these pop-ups come on top of other work I may be doing on my computer. Link to comment
Michel Kohanim Posted August 6, 2018 Share Posted August 6, 2018 @asbril, Are those devices that don't communicate battery devices? With kind regards, Michel Link to comment
asbril Posted August 7, 2018 Share Posted August 7, 2018 1 hour ago, Michel Kohanim said: @asbril, Are those devices that don't communicate battery devices? With kind regards, Michel No Michel. However when I activate the device (manually or in the AC) ON or OFF, the device communicates again. As such it is not a big issue but weird. Another issue that I have had with 5.0.13 is that one specific device (a mimo-lite) has disappeared a few times when launching the AC. After doing a Restore, the device comes back. I have two Mimo-lite devices and it only occurs with one of the two. Link to comment
Michel Kohanim Posted August 7, 2018 Share Posted August 7, 2018 Hi asbril, Does the node actually disappear from the AC? With kind regards, Michel Link to comment
asbril Posted August 7, 2018 Share Posted August 7, 2018 15 minutes ago, Michel Kohanim said: Hi asbril, Does the node actually disappear from the AC? With kind regards, Michel Yes, it has happened at least 5 times Link to comment
Michel Kohanim Posted August 7, 2018 Share Posted August 7, 2018 Hi @asbril, Thanks so very much! Can you please send your backup and error log to support@universal-devices.com? With kind regard, Michel Link to comment
Chris Jahn Posted August 7, 2018 Share Posted August 7, 2018 16 hours ago, asbril said: Yes, it has happened at least 5 times Hi Asbril, Can you please try doing a restore to get all the nodes back, and then do a synchronize and see if the nodes disappear. If they disappear then it is because the Z=Wave dongle does not think that device is in the Z-Wave network and thus deletes the ISY nodes for the device. In this case, you will have to exclude the device and include it again. Link to comment
asbril Posted August 7, 2018 Share Posted August 7, 2018 1 hour ago, Chris Jahn said: Hi Asbril, Can you please try doing a restore to get all the nodes back, and then do a synchronize and see if the nodes disappear. If they disappear then it is because the Z=Wave dongle does not think that device is in the Z-Wave network and thus deletes the ISY nodes for the device. In this case, you will have to exclude the device and include it again. Hi Chris, I did as you suggested, synch all nodes and indeed the mimo-lite node disappeared. Unfortunately, this device is somewhat hidden near the ceiling (it controls automatic curtains) and it will take some effort to access it and do an exclude/include. For the time being I am doing a restore to get it back. Link to comment
asbril Posted August 7, 2018 Share Posted August 7, 2018 3 hours ago, Michel Kohanim said: Hi @asbril, Thanks so very much! Can you please send your backup and error log to support@universal-devices.com? With kind regard, Michel Hi Michel, in view of Chris' suggestion and my reply, should I still send you my backup and error log ? Link to comment
Michel Kohanim Posted August 8, 2018 Share Posted August 8, 2018 Hi @asbril, No, thanks so much. With kind regards, Michel Link to comment
asbril Posted August 9, 2018 Share Posted August 9, 2018 On 8/7/2018 at 1:15 PM, Chris Jahn said: Hi Asbril, Can you please try doing a restore to get all the nodes back, and then do a synchronize and see if the nodes disappear. If they disappear then it is because the Z=Wave dongle does not think that device is in the Z-Wave network and thus deletes the ISY nodes for the device. In this case, you will have to exclude the device and include it again. Hey Chris, good morning.... I was finally able to exclude and re-include the mimo-lite and indeed the device now remains after doing a synch all nodes. Thanks !!!! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.