theedudenator Posted September 25, 2019 Posted September 25, 2019 Every 8monts to a year I have a PLM failure.... 80% of my devices are zwave 20% are insteon I have ELK alarm with the module, I use ELK motion sensors to trigger ISY actions. I subscribe to ISY portal. Do I have options to get rid of the PLM?
kissfan Posted September 25, 2019 Posted September 25, 2019 Go all zwave and call it a day. Sent from my iPhone using Tapatalk
mwester Posted September 25, 2019 Posted September 25, 2019 There are two firmwares for the ISY -- one will put the ISY into a "safe" (non-operational) mode when the PLM fails, the other does not -- both will work with z-wave and (if your PLM is working) with the Insteon devices. So, if you switch firmwares, you'll at least keep everything else running when the PLM fails (until you can switch those last few devices over to Z-wave or other technology).
theedudenator Posted September 25, 2019 Author Posted September 25, 2019 5 hours ago, kissfan said: Go all zwave and call it a day. Sent from my iPhone using Tapatalk I think I need the PLM for ELK integration.
theedudenator Posted September 25, 2019 Author Posted September 25, 2019 I guess I dont.Just installed the zwave only firmware, now I need to replace 5 devices...Sent from my SM-G955U using Tapatalk 1
Recommended Posts