ctviggen1 Posted December 1, 2019 Posted December 1, 2019 I have started an "All lights" scene. We already have "Downstairs" scenes and "Upstairs" scenes. Can I just copy the Downstairs scene and the Upstairs scene into the All Lights scene? If so, are there problems controlling this with Alexa (I.e., :"Alexa, turn off All Lights.")? Are there any other issues? Or should I just copy all my lights into the "All lights" scene? Thank you.
paulbates Posted December 1, 2019 Posted December 1, 2019 (edited) No. Unless you have hundreds of devices and scenes already, that could be using up a lot of plm memory, the best way is to create multiple scenes with significant overlap. and use them in programs individually. Doing that won't hurt anything and will provide the instant performance insteon is known for All lights scene is the way to go Paul Edited December 1, 2019 by paulbates 1
lilyoyo1 Posted December 1, 2019 Posted December 1, 2019 How Paulbates described is what I do. Each room has a scene where every device is setup as a responder. I have about 5 different programs that control those scenes.
ctviggen1 Posted December 2, 2019 Author Posted December 2, 2019 Thanks. I can make this one large scene, and then have Upstairs, Downstairs, etc., too.
Recommended Posts