Mecheng70 Posted March 19, 2020 Posted March 19, 2020 Using HomeAssistant 0.106.6 ISY - 5.0.16B In the ISY the innovelli creates 3 devices. From what I can tell, the "set" device is turns on and off based on the manual operation of the switch. The _1 device changes state when the switch is automated. Attempted to create a program that changes the _1 to the status of "set" labeled node. The If was where the "set" device was on or not off. Then the program would turn the _1 on Else the program would turn the _1 off. This does not seem to work as I have intended. Any suggestions?
danbutter Posted March 22, 2020 Posted March 22, 2020 Are you trying this program in the ISY or HA (home assistant)?
Mecheng70 Posted March 22, 2020 Author Posted March 22, 2020 In the ISY. was able to create the programs and get the status of the manual to match the automation.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.