Jump to content

Two lights in scene aren't responding


Recommended Posts

Posted

I added two additional lights to an existing scene on a KPL that turns all lights off.  The two new lights I added do not turn off when I use the KPL.  They both show action as "off" in admin console.  If I press the KPL a second time, the two lights will go off along with the two bedroom lights that are programmed to turn on when the scene is on.  Any ideas?  Thanks!

Posted
31 minutes ago, smarthome_newbie said:

I added two additional lights to an existing scene on a KPL that turns all lights off.  The two new lights I added do not turn off when I use the KPL.  They both show action as "off" in admin console.  If I press the KPL a second time, the two lights will go off along with the two bedroom lights that are programmed to turn on when the scene is on.  Any ideas?  Thanks!

Check your links in the new devices and compare them to what ISY thinks they have. Right click on each device and select it from the pulldown menu.

Posted
37 minutes ago, larryllix said:

Check your links in the new devices and compare them to what ISY thinks they have. Right click on each device and select it from the pulldown menu.

Is this what you mean? Not sure what I'm supposed to be checking.

 

insteon.png.c8741325d98d2b30de06a31795f29f0b.png

Posted
1 hour ago, smarthome_newbie said:

Is this what you mean? Not sure what I'm supposed to be checking.

 

insteon.png.c8741325d98d2b30de06a31795f29f0b.png

Close, but check the links of the devices. Then at the bottom you will see a "compare" button that compares the device to ISY.

Posted
5 minutes ago, larryllix said:

Close, but check the links of the devices. Then at the bottom you will see a "compare" button that compares the device to ISY.

 

5 minutes ago, larryllix said:

Close, but check the links of the devices. Then at the bottom you will see a "compare" button that compares the device to ISY.

Like this?

358145838_insteon2.thumb.png.4fa370f24c1ddf1683666d8b6de588c9.png

Posted
25 minutes ago, smarthome_newbie said:

Do you think I should delete the scene and add it all again?

It can't hurt and is easy enough to do in ISY. Make sure your battery devices are link enabled, one at a time.

Posted
11 hours ago, smarthome_newbie said:

The two new lights I added do not turn off when I use the KPL.  

In what mode is your KPL button? "toggle" mode?  Is the KPL button ON or OFF once pressed?  When you press this button (the first time), what happens to the other lights in the scene?  Do they turn ON or OFF?

 

12 hours ago, smarthome_newbie said:

If I press the KPL a second time, the two lights will go off along with the two bedroom lights that are programmed to turn on when the scene is on.

To be clear, you press the button a second time and all lights go OFF?  Is the KPL button also OFF?  Was the KPL button ON or OFF initially (before you pressed it a second time)?

Posted
23 hours ago, smarthome_newbie said:

That was it.  I feel dumb.  Thanks to you and the others for the help!

Nothing dumb...we all overlook things!

Glad it's all working now.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...