Jump to content
View in the app

A better way to browse. Learn more.

Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

ON-But no link?

Featured Replies

Posted

I have an Insteon System that has 40+ switches and an ISY99. There have been no changes in the setup for quite awhile. In the past few weeks we have noticed a particular light "location B" was on when no one had switched it on. Today I found that another location "location A" was triggering the first light on. I went into ISY and checked the published links, there were none between the two. The only common ground was that all my swithes, including both locations here are controlled by an ALL-OFF scene. I checked the ISY log and saw only location A in the log. I tried several times and each time by turning "location A" on, "location B" would also follow. When I trurn "A" off, "B" always stays on.

 

For clarity, "A" is two Switchlinc relays tied to each other by a scene, "B" is a simple single Switchlinc.

 

Thanks for the help.

 

aLf

Hi aLf,

 

This is quite odd. The first thing I would suggest is to do a Restore Device on "B". This will remove all the links that might be in that switch but not reflected in ISY.

 

With kind regards,

Michel

I have an Insteon System that has 40+ switches and an ISY99. There have been no changes in the setup for quite awhile. In the past few weeks we have noticed a particular light "location B" was on when no one had switched it on. Today I found that another location "location A" was triggering the first light on. I went into ISY and checked the published links, there were none between the two. The only common ground was that all my swithes, including both locations here are controlled by an ALL-OFF scene. I checked the ISY log and saw only location A in the log. I tried several times and each time by turning "location A" on, "location B" would also follow. When I trurn "A" off, "B" always stays on.

 

For clarity, "A" is two Switchlinc relays tied to each other by a scene, "B" is a simple single Switchlinc.

 

Thanks for the help.

 

aLf

  • Author

Michel:

 

As always, you always have the right answer. That did the trick. I'll keep testing it, but I'm confident with you as the captain. Of ISY that is!

 

Tim

Guest
This topic is now closed to further replies.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.