oper8 Posted March 17, 2021 Posted March 17, 2021 What is the right way to be able to change a configuration parameter for a z-wave device from the admin console ? In this particular case, I'm referring to a ZOOZ S2 multi switch. I can change the configuration parameter running a program but I cannot change it from the admin console. I tried "Write changes" after I entered the parameter but it seems that the command is not sent to the device. Works perfectly fine if I run "Then" in the program (see screenshots attached).
DennisC Posted March 18, 2021 Posted March 18, 2021 Are you clicking on the "Set Configuration" button? 1
oper8 Posted March 18, 2021 Author Posted March 18, 2021 Yes, but it seems nothing is happening. I will have to test with few more parameters. I forgot to mention, I run F/W 5.3.2 with ZW version 6.81.00
oper8 Posted March 19, 2021 Author Posted March 19, 2021 Update on this issue: No more problems, the parameter change is transmitted perfectly fine to device. I pressed "Set Configuration", the "Write changes", then "Query" Thanks for the help !
Recommended Posts