Jump to content
View in the app

A better way to browse. Learn more.

Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Reset ISY-99 and PLM - moved house

Featured Replies

Posted

Hello,

 

I've searched for the answer here but can't find all the info I am looking for. I have just moved house and want to completely reset my ISY so that I can start my network again. I have reset the ISY and all the config has gone, but do I need to do anything to the PLM? When I log in now the ISY says 'System Busy' and then 'Linking' and i get the progress bar that has been building links for the last 24 hours. I am therefore thinking I need to wipe the PLM too so that both the ISY and the PLM are in factory new state. Is this correct? If not, what should I do to get me back to the beginning?

 

Thanks for any advice

 

Jon

Have you tried a Factory reset on the PLM?

 

Unplug the PLM

Disconnect the ISY99i from the PLM

While holding the Set Button, plug the PLM in and hold the set button for three seconds. Release the button and wait for the LED to turn back on.

Then you can unplug the PLM and reconnect the ISY99i

  • Author

That did the trick - thank you - should have thought about the PLM reset.

 

All is working properly now

 

Jon

I assume Jon would also be wanting to factory default all his Insteon devices? Otherwise, what is gained by just resetting the ISY/PLM?

Hi WayneW,

 

If the change is only the PLM then there's no need to do restore devices; restore PLM changes the PLM id of all devices with the PLM id of the newly installed PLM.

 

With kind regards,

Michel

I assume Jon would also be wanting to factory default all his Insteon devices? Otherwise, what is gained by just resetting the ISY/PLM?
Guest
This topic is now closed to further replies.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.