vbPhil Posted July 4, 2021 Posted July 4, 2021 What are each of the 3 LEDs used for? The right most LED is continually flashing. I think it started after I initiated a Polisy Update. It's been 20 minutes, still flashing. 1
vbPhil Posted July 4, 2021 Author Posted July 4, 2021 It continued to flash for a couple hours. I did a Polisy reboot but that didn't help. So I did a Polisy shutdown and then pulled the plug. Everything started up okay and now the light is out. Just the left most LED is on. So I guess everything is normal again.
larryllix Posted July 4, 2021 Posted July 4, 2021 Sounds like you just did a major upgrade.I have seen my RPis take 5 to 6 hours for a major upgrade, including most packages and an OS upgrade.Sent from my SM-G781W using Tapatalk
vbPhil Posted July 4, 2021 Author Posted July 4, 2021 14 minutes ago, larryllix said: Sounds like you just did a major upgrade. I have seen my RPis take 5 to 6 hours for a major upgrade, including most packages and an OS upgrade. Sent from my SM-G781W using Tapatalk I hope I didn’t ruin something by pulling the plug. Seems okay. BTW, I don’t see how to backup Polisy, just a restore. Can it be backed up to a network drive?
DaveStLou Posted July 4, 2021 Posted July 4, 2021 53 minutes ago, vbphil said: Can it be backed up to a network drive? Under Settings > Polisy Configuration, click the [Download] button right above and save the file wherever you want. 1
vbPhil Posted July 4, 2021 Author Posted July 4, 2021 1 minute ago, DaveStLou said: Under Settings > Polisy Configuration, click the [Download] button right above and save the file wherever you want. Duh? I saw that and thought Download to Polisy. Does it backup the whole system or just Polygot node server installs? Thanks. Phil
vbPhil Posted July 4, 2021 Author Posted July 4, 2021 17 minutes ago, DaveStLou said: It's just the node servers. Okay thanks. One last question. Any idea what the LEDs indicate?
lilyoyo1 Posted July 4, 2021 Posted July 4, 2021 7 minutes ago, vbphil said: Okay thanks. One last question. Any idea what the LEDs indicate? See the end of the wiki https://wiki.universal-devices.com/index.php?title=Polisy:User_Guide 1
larryllix Posted July 5, 2021 Posted July 5, 2021 (edited) 4 hours ago, vbphil said: I hope I didn’t ruin something by pulling the plug. Seems okay. BTW, I don’t see how to backup Polisy, just a restore. Can it be backed up to a network drive? I doubt it but with linux (RPi) and freeBSD (polisy) you can run the update/upgrade lines again and it will sort out what isn't up to date. Edited July 5, 2021 by larryllix
vbPhil Posted July 5, 2021 Author Posted July 5, 2021 17 hours ago, lilyoyo1 said: See the end of the wiki https://wiki.universal-devices.com/index.php?title=Polisy:User_Guide I can't find this in the WiKi. UDI Support gave me this information. Quote Left = Power Middle = Tx Right = Rx Left + Middle + Right blinking = error Middle and/or Right blinking = upgrading (this may take a while depending on the number of packages) 1 1
MrBill Posted July 5, 2021 Posted July 5, 2021 8 minutes ago, vbphil said: I can't find this in the WiKi. UDI Support gave me this information. I'm glad you asked them. I've been wondering since you asked the question. My Polisy's are located in a place where I never see them unless I specifically go there to add/change or unpower/repower something. After you asked I looked at the same wiki page expecting the answer to be there, but it really isn't. Other than power tho, I'm not sure I would be confident reading the meaning... if I needed to know because a specific problem was attracting my eye towards them I'd probably email support anyway.
Recommended Posts