60Driver Posted September 4, 2021 Posted September 4, 2021 I have added 42 of the Jasco ZW3005 Dimmers and 11 ZW4005 switches to the ISY. The ZW4005s all show as controllers. The ZW3005s all show as receivers. Looking at the ZWave Alliance website I found the below supported classes for the ZW3005 and ZW4005 (pasted below). They appear to be the same. Can anyone tell me why the ZW3005 can't be a controller? I envisioned using tablets mounted to the walls as scene controllers but I haven't found a way to do create scenes without a switch acting as the controller. If the ZW3005 can't be a controller is there away to create a virtual controller for the scenes? Model: In-Wall Smart Dimmer (14321/ZW3005) Z-Wave Certification Number: ZC10-16125367 Supported Command Classes Association Group Info Association V2 Basic Configuration CRC16 Encapsulation Device Reset Locally Firmware Update Meta-Data V2 Manufacturer Specific V2 Powerlevel Scene Activation Scene Actuator Conf Switch All Switch Multilevel V2 Version V2 Z-Wave Plus Info V2 Controlled Command Classes Basic Model: In-Wall Switch (39455 / ZW4005) Z-Wave Certification Number: ZC10-19126816 Supported Command Classes Association Group Info Association V2 Basic Configuration CRC16 Encapsulation Device Reset Locally Firmware Update Meta-Data V2 Manufacturer Specific V2 Powerlevel Scene Activation Scene Actuator Conf Switch All Switch Binary Version V2 Z-Wave Plus Info V2 Controlled Command Classes Basic
lilyoyo1 Posted September 4, 2021 Posted September 4, 2021 37 minutes ago, 60Driver said: I have added 42 of the Jasco ZW3005 Dimmers and 11 ZW4005 switches to the ISY. The ZW4005s all show as controllers. The ZW3005s all show as receivers. Looking at the ZWave Alliance website I found the below supported classes for the ZW3005 and ZW4005 (pasted below). They appear to be the same. Can anyone tell me why the ZW3005 can't be a controller? I envisioned using tablets mounted to the walls as scene controllers but I haven't found a way to do create scenes without a switch acting as the controller. If the ZW3005 can't be a controller is there away to create a virtual controller for the scenes? Model: In-Wall Smart Dimmer (14321/ZW3005) Z-Wave Certification Number: ZC10-16125367 Supported Command Classes Association Group Info Association V2 Basic Configuration CRC16 Encapsulation Device Reset Locally Firmware Update Meta-Data V2 Manufacturer Specific V2 Powerlevel Scene Activation Scene Actuator Conf Switch All Switch Multilevel V2 Version V2 Z-Wave Plus Info V2 Controlled Command Classes Basic Model: In-Wall Switch (39455 / ZW4005) Z-Wave Certification Number: ZC10-19126816 Supported Command Classes Association Group Info Association V2 Basic Configuration CRC16 Encapsulation Device Reset Locally Firmware Update Meta-Data V2 Manufacturer Specific V2 Powerlevel Scene Activation Scene Actuator Conf Switch All Switch Binary Version V2 Z-Wave Plus Info V2 Controlled Command Classes Basic I'm assuming the 3005 is not a zwave plus device. Does it show status immediately when you operate it manually? If it doesn't that may be why it cannot be a controller
60Driver Posted September 5, 2021 Author Posted September 5, 2021 1 hour ago, lilyoyo1 said: I'm assuming the 3005 is not a zwave plus device. Does it show status immediately when you operate it manually? If it doesn't that may be why it cannot be a controller They are zwave plus devices and there status changes immediately when manually activated.
lilyoyo1 Posted September 5, 2021 Posted September 5, 2021 10 minutes ago, 60Driver said: They are zwave plus devices and there status changes immediately when manually activated. I'd contact ge to see what the difference is. With zwave, not all devices can be controllers.
60Driver Posted September 10, 2021 Author Posted September 10, 2021 On 9/4/2021 at 7:59 PM, lilyoyo1 said: I'd contact ge to see what the difference is. With zwave, not all devices can be controllers. I got feed back from Jasco today that the switches should be showing as controllers. They said contact Universal Devices
MrBill Posted September 10, 2021 Posted September 10, 2021 11 hours ago, 60Driver said: I got feed back from Jasco today that the switches should be showing as controllers. They said contact Universal Devices The official communication channel with Universal Devices is via support tickets, you should email support@universal-devices.com to open a ticket. While the forum is operated by UDI, and they do occasionally comment, they don't read and track every thread. 2
Recommended Posts