What is "Process Message: failed" in ISY

[tome]

I was playing around with my motion sensors before mounting them and sometimes see the message "Process Message: failed" in the Event Viewer (see below). What does this mean?

 

Wed 12/23/2009 04:17:08 PM : [iNST-SRX ] 02 50 13.EF.B7 00.00.01 C7 11 01 LTONRR (01)

 

Wed 12/23/2009 04:17:08 PM : [standard-Group][13.EF.B7-->Group=1] Max Hops=3, Hops Left=1

 

Wed 12/23/2009 04:17:08 PM : [ 13 EF B7 1] DON 1

 

Wed 12/23/2009 04:17:08 PM : [ 13 EF B7 1] ST 255

 

Wed 12/23/2009 04:17:08 PM : [iNST-SRX ] 02 50 13.EF.B7 00.00.01 C7 11 01 LTONRR (01)

 

Wed 12/23/2009 04:17:08 PM : [standard-Group][13.EF.B7-->Group=1] Max Hops=3, Hops Left=1

 

Wed 12/23/2009 04:17:08 PM : Duplicate: ignored

 

Wed 12/23/2009 04:17:08 PM : [iNST-SRX ] 02 50 13.EF.B7 00.00.01 C7 11 01 LTONRR (01): Process Message: failed

 

Wed 12/23/2009 04:17:08 PM : [standard-Group][13.EF.B7-->Group=1] Max Hops=3, Hops Left=1

 

Wed 12/23/2009 04:17:08 PM : [iNST-SRX ] 02 50 13.EF.B7 12.9F.2A 42 11 01 LTONRR (01)

 

Wed 12/23/2009 04:17:08 PM : [standard-Cleanup][13.EF.B7-->ISY/PLM Group=1] Max Hops=2, Hops Left=0

[Michel Kohanim]

Hi tome,

 

You usually see that after a duplicate message. In short, the process message failed since it was a duplicate of the previous message. Some RF devices send their messages twice (for reliability) and ISY intelligently discards the duplicate.

 

With kind regards,

Michel

[tome]

Hi tome,

 

You usually see that after a duplicate message. In short, the process message failed since it was a duplicate of the previous message. Some RF devices send their messages twice (for reliability) and ISY intelligently discards the duplicate.

 

With kind regards,

Michel

 

Ok, so it is nothing to worry about then..?

[Michel Kohanim]

Not at all!

 

With kind regards,

Michel