CPrince Posted December 13, 2021 Posted December 13, 2021 With the shortage of Insteon products I figured I would try out Z-Wave. I broke down and upgraded to Isy ver 5.3, bought the new Z-Wave 500 board ver. 6.82.01 and set it up. Seems to work. I purchase a Fibaro Motion Sensor per @lilyoyo1suggestion. So now I am trying to configure it. note: "Query" and "Write Changes" appear under the settings. I just moved up in picture above to save space. So for configuration I have a "Set Configuration", "Parameter Number", "Parameter Vales", "Write Changes. I want to write 900 to parameter 64. The manual says 2 bytes. It doesn't say "unsigned" or "signed" which is a option. Being battery operated I have to open communication by pressing button B once. So now what order do I click on the buttons to write to the device. How can I verify this change was successful? Is there an App or something I can use to program this or read the configuration? I am not using a Z-Wave hub just the Isy. Next I want to put 300 in parameter 42.
Recommended Posts