Jump to content
View in the app

A better way to browse. Learn more.

Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

problems resetting, restoring, and removing icon switch

Featured Replies

Posted

here was my initial setup: I had two lights in my living room that each have an Icon switch controlling them, lets call them A and B. There is also a third switch © that controls nothing and it was in the scene (in the ISY)

to control A and B.

 

I wanted to remove C from the scene and use it to control something else.

 

I went to each scene and removed it, including removing it properly from the remotelinc.

 

When I got finished, C still controlled A and B.

 

I tried factory resetting all 3 switches, which fixed the remaining connections between them, but when I restored all 3 of them, It brought back the connection / problem (C still controls A and B) and this:

 

Now, both A and B are working very oddly: the Off switch works, but the ON, doesn't work with a tap, but do work with a press and hold. The ramp rates and on levels don't work and won't reset properly.

 

These Icon switches were working fine before. they are 2876D3 and say v.27 in the ISY.

 

I air gapped all of the switches for a second or two and it didn't seem to help.

 

is this an i2 issue?

 

should I just shoot myself?

  • Author

okay, I removed all 3 switches from every scene that they were a part of and factory reset all 3 switches. Then I restored all 3 switches and created a new scene and put A and B in the scene. Now A and B work properly, but C still controls A and B.

 

I'm now in a trap. If I factory reset C, it doesn't control A or B, but it is no longer connected to ISY. When I restore it, it resumes controlling A and B, despite no obvious info in ISY that it is to control A or B.

 

I appreciate any help.

 

Scott

Hi Scott -

 

Sounds like you have some half-links in your devices. If you're going to remove devices from all scenes and factory reset, go ahead and remove them from the ISY as well. So, I would:

 

- remove each device from the ISY (which will remove them from scenes as well)

- factory reset each device

- re-add the devices back into the ISY

- re-add them to your scenes as needed

  • Author

I'd like to complete this thread. This solution worked and I no longer have the half-links and the problems noted above.

 

thanks very much!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.