@bpwwer Hi, Weather link has been running for about a day on PG3 but it stopped updating at about 3 AM. I copied the log shortly before  the updating stopped. Also restart didn't work. Had to stop start restart. 

Thanks Gary

New Text Document.txt

@garybixlerThat's strange.  

It looks like this was called from a query, is that right?

It crashed because it didn't find an 'indoor' node.  Based on the data just before that, it looks like you have an indoor sensor so should have an indoor node.   Do you have an indoor node?

I don't see anything wrong in the code that would cause this.  It's like the indoor node disappeared before it tried to update the node values.

@bpwwer Yes, the unit itself has an indoor temp and humidity sensor. I was wondering because the PG2 version has an indoor node. Only node one is loaded into the PG3 version. I added a couple of snippets from the PG2 version.

Thanks Gary

Edited January 21, 20223 yr by garybixler

The PG3 version should have both nodes too.  

I just pushed out version 2.0.2. I made a change that should prevent the crash, but I don't know why the node wasn't created.

If it doesn't create the node when you restart, can you can post the first 30 seconds of the log after the restart?

After installing the new version it started but basically hung up on node 2. I included the log.

Thanks Gary

 

 

 

 

New Text Document.txt

Edited January 22, 20223 yr by garybixler

Update: The log wasn't in debug. A new log after restart. 

New Text Document.txt

This is what's  returned when I do   http://192.168.30.63/v1/current_conditions. 

New Text Document.txt

Edited January 22, 20223 yr by garybixler

This is the log from the start in PG2.

New Text Document.txt

Thanks @garybixler, I appreciate the time to post all those details.

I've found the problem and fixed it in version 2.0.3  All you should need to do is restart to get the new version.

Thanks so much. Everything looks perfect.