stevehoyt Posted January 26, 2022 Posted January 26, 2022 (edited) I believe I have everything running as far as I can see. The node server has started and been authorized. The tag controller shows up in the ISY admin console. I have done a discovery and add all nodes from the admin console. Also did a discovery from the PG3 version on polyglot. For some reason no tags show up. I have 3 tags the temp sensor, PIR detector, and the air and light motion tags All software has been updated and both the polyglot and polisy rebooted. Is there anything else I need to do. See screen shots and log file ( in debug mode ) below. @Jimbo Thanks Steve WirelessTag_1-26-2022_111702_AM.txt Edited January 26, 2022 by stevehoyt
Jimbo.Automates Posted January 26, 2022 Posted January 26, 2022 Never use the "add all nodes from the admin console" that's not meant for Polyglot... It looks like you also have the issue with multiple copies of the NS running, that's not supposed to happen but seems to be happing to many... Easiest fix is to reboot Polisy, or log in with a terminal and kill the processes. I or @bpwwer or @Michel Kohanim can provide the commands if you need them.
stevehoyt Posted January 26, 2022 Author Posted January 26, 2022 I rebooted polisy twice along with the isy on the 994i. It does not appeared to have changed anything. See logs etc below. I also did a discover in PG3 for tag manager just before I captured the logs. If you think ssh commands are the next step, could one of you send them to me. @Jimbo @bpwwer @Michel Kohanim Thanks WirelessTag_1-26-2022_32659_PM.txt
Jimbo.Automates Posted January 26, 2022 Posted January 26, 2022 OK, found the issues, should really be fixed in 3.0.11. It's actually common code in all my nodeservers so now I need to fix them all. It doesn't occur all the time, only if the ISY is slow to add a new node, which happens... 1
stevehoyt Posted January 27, 2022 Author Posted January 27, 2022 (edited) no problem no hurry to fix it Just saw fix is up. Thanks Edited January 27, 2022 by stevehoyt
Jimbo.Automates Posted January 27, 2022 Posted January 27, 2022 Ya, others reporting it's still having issues. Working with @bpwwer to figure out a solution.
Jimbo.Automates Posted January 27, 2022 Posted January 27, 2022 Really think it's fixed this time, 3.0.12 released...
stevehoyt Posted January 28, 2022 Author Posted January 28, 2022 @Jimbo Don't see any change yet. See attached info below. I restarted everything and rebooted the Polisy. I am connecting to an ISY on a 994. I saw on another thread that it was throttling issue. If it would help for testing purposes, I could install another instance of the tag server, on my PG3 and point it to the not used, but running, ISY on the polisy. Steve WirelessTag_1-28-2022_75619_AM.txt
BamBamF16 Posted January 28, 2022 Posted January 28, 2022 Make sure 'Monitor Tags' on admin console is set to true and push the actual monitor tags button.
stevehoyt Posted January 28, 2022 Author Posted January 28, 2022 (edited) @Jimbo @garybixler @bambamf16 Bambam Gary showed me where to find it, but I don't have the tag manager. I only have the controller. Is there something I need to do to make it appear? See admin console capture below Thanks Edited January 28, 2022 by stevehoyt
BamBamF16 Posted January 28, 2022 Posted January 28, 2022 I would right click the controller and check group nodes to make sure it isnt orphaned in a folder somewhere. Jeff
garybixler Posted January 28, 2022 Posted January 28, 2022 It should be visible as the name assigned to your tag manager at your wirelesstag account. Mine was Home. 1
stevehoyt Posted January 28, 2022 Author Posted January 28, 2022 Thank You That was the issue. I have my ISY named anacapa and my wireless tag manager as anacapa and I could not see the difference. I will rename my wireless manager when I get the chance. 1
Recommended Posts