plars3n Posted January 4, 2010 Share Posted January 4, 2010 Hello, I have just installed a SeriaLinc into an existing ISY99i based system. I would now like to control that SeriaLinc using the ISY. Is there any current way to do this? If not, is there a plan to support this device in the future? Thank you, -Paul Link to comment
Michel Kohanim Posted January 5, 2010 Share Posted January 5, 2010 Hi Paul, Currently there's no support for SeriaLinc. Future support purely depends on the number of requests to support this device. Currently - and including you - we have only had 2 requests in the past 9 months. With kind regards, Michel Link to comment
RAldridge Posted January 6, 2010 Share Posted January 6, 2010 Hi Paul, Currently there's no support for SeriaLinc. Future support purely depends on the number of requests to support this device. Currently - and including you - we have only had 2 requests in the past 9 months. With kind regards, Michel Make that three! Thanks so much, Ruben Link to comment
Quixote Posted January 6, 2010 Share Posted January 6, 2010 Four here. I'd like to eventually use them for control of a home theater system, as well as set up a couple of stepper motors to control my vertical blinds using Serialincs. Thanks. Link to comment
nstein Posted January 6, 2010 Share Posted January 6, 2010 I also have one sitting in the box, waiting on ISY support and some implementation difficulties. -Nick Link to comment
Michel Kohanim Posted January 7, 2010 Share Posted January 7, 2010 Thanks so very much for all your input. We just need 20 more and we'll be on our way! With kind regards, Michel Link to comment
jamesx0 Posted January 7, 2010 Share Posted January 7, 2010 Count me in. I would like to hook a few up to my A/V system. Link to comment
montgomerydkm Posted March 21, 2011 Share Posted March 21, 2011 Please Please Please, Help with this device. I'm new to insteon and for several months now Ive been designed an apple based system using an Isy99pro, a 2413 dual band modem, (4) dual band lamp linc's, (90)insteon dimmers, (4)I/O linc's for gates and garage doors, (4) thermostats and also (4) Ir linc's which I'm using for iphone control of 4 separate home theater systems(including cable tv, blu ray, apple tv, Av receiver and projector or flat panel control. All of this I have managed to get working very well. Now Im trying to control two xantech mrc 88 amps. which I'm using for 14 zones of whole house audio. I have had some success using a smartlinc as my controller, but I have failed with getting it to link with Isy. I have an intellix hdmi distribution system on stand by that i need to control via 232 as well. Any help at all would really be appreciated. Thank you for the help you provided me with port forwarding my apple router. Link to comment
Michel Kohanim Posted March 22, 2011 Share Posted March 22, 2011 Hello montgomerydkm, Unfortunately we do not yet support seriallinc. This said, if you have a TCP to Serial converter (such as Global Caché), then you can use our Network module to send any type of string to your end devices. With kind regards, Michel Link to comment
montgomerydkm Posted March 22, 2011 Share Posted March 22, 2011 Michel. I checked out Global Cache'. I can't wait to try one of their devices. Thanks again for your support and suggestion. Link to comment
Michel Kohanim Posted March 22, 2011 Share Posted March 22, 2011 Hi montgomerydkm, My pleasure! Here's more information on the networking module: http://www.universal-devices.com/mwiki/ ... Networking With kind regards, Michel Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.