Has anyone out there integrated a (few) Zooz 700 Series ZSE42 Water Leak Detectors into an ISY994i with a 500 Series dongle in it?  Does it work?  Overall what do you think of it?  How did the integration go, fairly simple?  What comments may you offer?  Thanks.

I went ahead and bought one to test, it worked, so I got 5 more and now have 6 integrated.  They all appear to be working but it was a bit strange on the first functional test, 3 out of the 6 I had to trigger twice to get the state change and it too adds a couple more nodes that don't come in when you Include the device.  Had a feeling like the device wasn't awake but the blue LED was flashing.  Then the last 3 worked first time.  I'm no Z-Wave guru at all, since Insteon went down I've been moving to Z-Wave but a lot to still learn/understand.  I'm thinking let them run for a few days, maybe some self-healing - re-routing will happen, and I'll Functional Test again.

Just added one on Friday - super simple, group the devices, makes it simpler to view.  I also add an alert in case battery level gets <20%.

I have about 20 leak sensors half Insteon half z-wave most are these zooz and then a couple of the homeseer units.  All work well after a few months together on the IOP, never tried these on my now dormant 994

On 5/21/2022 at 2:33 PM, GJ Software Products said:

I went ahead and bought one to test, it worked, so I got 5 more and now have 6 integrated.  They all appear to be working but it was a bit strange on the first functional test, 3 out of the 6 I had to trigger twice to get the state change and it too adds a couple more nodes that don't come in when you Include the device.  Had a feeling like the device wasn't awake but the blue LED was flashing.  Then the last 3 worked first time.  I'm no Z-Wave guru at all, since Insteon went down I've been moving to Z-Wave but a lot to still learn/understand.  I'm thinking let them run for a few days, maybe some self-healing - re-routing will happen, and I'll Functional Test again.

Some of the Z wave switches I have been putting in have "Basic Scenes" when they are added.  Also not a guru I don't know what they do and why some of the same switches do it and others don't but they work.