Richard Posted January 29, 2010 Share Posted January 29, 2010 When I try to log on to the ISY99i through a browser, I get a timeout message: "The server at 192.168.1.xxx is taking too long to respond." I unplugged the PLM and plugged it back it. This makes no difference. When I ran a program the week before, some of the lights did not go on or off at scheduled times. Is the ISY99i going bad? Or the PLM? How can I solve the problem. Link to comment Share on other sites More sharing options...
Richard Posted January 29, 2010 Author Share Posted January 29, 2010 Scratch that. I had unplugged my router during the week to reset it because of internet problems. Seems that when everything was plugged back in, a new address was assigned to the ISY99i. I am now logged into the administrative console. Sorry to be a bother. Link to comment Share on other sites More sharing options...
oberkc Posted January 29, 2010 Share Posted January 29, 2010 It has been too long to remember the details, but I think there is a way to assign a fixed address for the ISY. Early on, I found myself frequently having to find the ISY and the newly assigned IP address. No more. Link to comment Share on other sites More sharing options...
Rob Posted January 29, 2010 Share Posted January 29, 2010 With the latest versions you can assign a static ip right in the admin console. It's under the configuration tab. rob Link to comment Share on other sites More sharing options...
brad77 Posted January 29, 2010 Share Posted January 29, 2010 Alternatively, you can set up a DHCP reservation on your router (if your router supports this) so that the ISY is always given the same address when it asks for one. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.