stevehoyt Posted February 1, 2010 Share Posted February 1, 2010 In anticipation of my new smart meter from our local CA Utility being installed, I turned on the flex your power polling in the electricity tab. I just noticed in my log file that an entry was made It had 0 in the Device column and Flexyou in the Control column. I was wondering if this is correct or should they be reversed so that device would be flexyou and control would be 0 or 255.. Not a big deal just wondering Link to comment
Michel Kohanim Posted February 2, 2010 Share Posted February 2, 2010 Hi stevehoyt, Flex Your Power is a program independent of the Smart Meters. It simply gives you an indication of when CA ISOs may need your help. 0 = in active and the control is the module = Flex Your Power. With kind regards, Michel In anticipation of my new smart meter from our local CA Utility being installed, I turned on the flex your power polling in the electricity tab. I just noticed in my log file that an entry was made It had 0 in the Device column and Flexyou in the Control column. I was wondering if this is correct or should they be reversed so that device would be flexyou and control would be 0 or 255.. Not a big deal just wondering Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.