I had the occasion to turn some circuit breakers on and off several times while working on installing some new outlets in my house. The circuits power cycled have some Z-Wave devices on it. Apparently, power cycling these Z-Wave devices didn't do them any good, as I am getting strange communication errors now for these devices.

According to the wiki page article on communication errors, there should be an option in the Z-Wave menu in the Admin UI for healing the Z-Wave network. I cannot find this menu pick or its parent called Tools.

Is the Wiki page outdated? I am on firmware version 5.3.4 on an ISY994i with the Z-Wave plus board.

From the tips and tricks section:

 

Quote

If you are running 5.3 and above, network heal is no longer there. This isn't on UDI but zwave itself no longer supporting network heal (official zwave +) along with the fact that network heal caused more issues than it solved. 500 series devices are self healing. Should a heal need to be done, you would do it on individual devices by right clicking on the device you want to update and using update neighbors. 

 

Thank you for this reference!