Chris McKean Posted January 16, 2023 Posted January 16, 2023 Just migrated from ISY994i ZW+ IR PRO to Polisy IoX with Zwave/Zmatter board yesterday. Everything is working fine except for one device. I have 6 or so Zwave devices that I had to manually install and was able to get all of them to work except for the Zooz Zen34. I am able to get it installed without a problem, but it won't control any devices. It has three options on the switch, Wall Controller, Wake Up, and Basic Control. The basic control, which I assume I would use to control other devices through scenes or programs doesn't have an option to turn it on or off via the ISY. It only has Query. I am able to install it in a scene with the Basic Control as the controller and my light as a responder, but it won't work. Also, if I create a program with IF as the Basic Control on and then the light, still doesn't work when I press the Zen34 switch. I have deleted all of the Zwave devices and reset the Z-wave dongle on the Polisy and reinstalled all devices once already. Any thoughts?
vbPhil Posted January 16, 2023 Posted January 16, 2023 Nothing specific for you but I have a couple ZooZ remote sensors that aren't working correctly, and UDI is aware and suggesting that it should be fixed in a future IoX update. I'm patiently waiting. 1
Chris McKean Posted January 16, 2023 Author Posted January 16, 2023 This is the only Zooz Zwave device I have, so it may not be compatible yet. Thanks for the info.
asbril Posted January 16, 2023 Posted January 16, 2023 I have posted on exactly the same issue. I am happy to note that this will be addressed in a future release.
Chris McKean Posted January 21, 2023 Author Posted January 21, 2023 Upgraded to 5.5.4 and the Zooz Zen34 still not working correctly.
Recommended Posts