ThisIsTheWay Posted January 20, 2023 Posted January 20, 2023 What is the correct connection for the Serial PLM Kit with a 2413S into Polisy Pro? Eth > Serial adapter > serial to USB > usb port on Polisy or Eth > Serial adapter > serial port on Polisy
firstone Posted January 20, 2023 Posted January 20, 2023 I think either will work on polisy. I'm using it with serial port directly but no reason USB shouldn't work. I think eisy only has usb though so that's the only way.
Techman Posted January 20, 2023 Posted January 20, 2023 The Polisy supports the following PLMs: 2412S and 2413S through the DB9 connector on the back. 2413U and 2448A7 through the USB port on the back 1
Brian H Posted January 20, 2023 Posted January 20, 2023 For the 2412S or 2413S. The PLM serial connector is a network style RJ45 with serial signals on it. As linked to in the previous reply. There was a cable with the needed RJ45 to DB9S inside the boxes shipping material. Material not marked so many missed it or tossed it with the empty box. There are some custom cables construction posts here also.
ThisIsTheWay Posted January 20, 2023 Author Posted January 20, 2023 4 minutes ago, Brian H said: the 2412S or 2413S. The PLM serial connector is a network style RJ45 with serial signals on it. As linked to in the previous reply. There was a cable with the needed RJ45 to DB9S inside the boxes shipping material. Material not marked so many missed it or tossed it with the empty box. There are some custom cables construction posts here also. I ordered the Serial PLM Kit from UI. So I've got it all setup now thanks to the advice above. I'm using the serial port!
Recommended Posts