Jump to content

-70001 VECTOR MAX CAPCITY


Adam Ant
Go to solution Solved by Geddy,

Recommended Posts

Posted

HI Everyone,

    I am getting quite a few of these errors in my error log.  The error messages wiki page says it is a VECTOR MAX CAPCITY error.  Anyone know what causes these?  Does that mean a function was expecting a different number of parameters? Anything to worry about?

 

Wed 2023/02/22 02:10:05 PM      0       -170001 <s:Envelope><s:Body><u:Subscribe xmlns:u="urn:udi-com:service:X_Insteon_Lighting_Service:1"><reportURL>REUSE_SOCKET</reportURL><duration>infinite</duration></u:Subscribe></s:Body></s:Envelope>

  • Solution
Posted
19 hours ago, Adam Ant said:

-170001

In prior posts this was classified as an "information only" type error. Indicating that it is not a real error and could be ignored. I am not sure if this has changed in Polisy/eisy era, but feel that if things are working well then it continues to be information only and could be ignored.

You reference a -70001 as Vector error, but you seem to have just left out the first "1" from the actual error code. 

I also get a lot of the -170001 "errors" and don't worry about it.

Quote

Thu 2023/02/23 07:49:19 AM System -170001 <s:Envelope><s:Body><u:DeviceSpecific xmlns:u="urn:udi-com:service:X_Insteon_Lighting_Service:1"><command>G_BT</command><node>45 7A E6 1</node><option></option><flag>0</flag><CDATA></CDATA></u:DeviceSpecific></s:Body></s:Envelope>
Thu 2023/02/23 08:31:11 AM System -170001 <s:Envelope><s:Body><u:GetCurrentSystemStatus xmlns:u="urn:udi-com:service:X_Insteon_Lighting_Service:1"><SID>uuid:0</SID></u:GetCurrentSystemStatus></s:Body></s:Envelope>
Thu 2023/02/23 09:31:10 AM System -170001 <s:Envelope><s:Body><u:GetCurrentSystemStatus xmlns:u="urn:udi-com:service:X_Insteon_Lighting_Service:1"><SID>uuid:0</SID></u:GetCurrentSystemStatus></s:Body></s:Envelope>

And that's just a small section of the error log from this morning.

Posted
32 minutes ago, Geddy said:

In prior posts this was classified as an "information only" type error. Indicating that it is not a real error and could be ignored. I am not sure if this has changed in Polisy/eisy era, but feel that if things are working well then it continues to be information only and could be ignored.

You reference a -70001 as Vector error, but you seem to have just left out the first "1" from the actual error code. 

I also get a lot of the -170001 "errors" and don't worry about it.

And that's just a small section of the error log from this morning.

Thank you!  Proves every 1 matters :)

  • Haha 1
Guest
This topic is now closed to further replies.

×
×
  • Create New...