AnthemAVM Posted October 31, 2023 Posted October 31, 2023 I moved to an eisy and installed a couple Zooz 800 Series Z-Wave switches, but for the life of me can't get them to exclude or include with the eisy. I have alot of aeotec repeaters, schlage locks and other z wave devices, so don't think range is an issue. Stupid question, but is the 800 Series compatible with eisy z mater at this time? Thanks.
Michel Kohanim Posted October 31, 2023 Posted October 31, 2023 @AnthemAVM, they should be supported. The first thing I recommend is to go to Z-Wave | X-Ray | Choose DH Controller from the drop down, and then click on the Go button. Look for Frequency and make sure it's set to US. If it is, please submit a ticket. With kind regards, Michel
peterathans Posted October 31, 2023 Posted October 31, 2023 I've got several Zooz ZWave 800 series devices, and they're working great. They also seem to play nice with my older 700 series switches.
AnthemAVM Posted October 31, 2023 Author Posted October 31, 2023 3 hours ago, Michel Kohanim said: @AnthemAVM, they should be supported. The first thing I recommend is to go to Z-Wave | X-Ray | Choose DH Controller from the drop down, and then click on the Go button. Look for Frequency and make sure it's set to US. If it is, please submit a ticket. With kind regards, Michel Great will try that. Michael
GJ Software Products Posted December 5, 2023 Posted December 5, 2023 I just included two Series 800 ZEN32 Scene Controllers and they play well with my Matter dongle on eisy. I haven't tried Associating or Grouping them with any of my other 700 Series devices. @Michel Kohanim when do you think (rough idea) when they'll be an 800 chip in the Matter board?
Recommended Posts