lhranch Posted January 28 Share Posted January 28 When I had the ISY, I could set the network port preferences as I wished. Now with the new ISY, the ports are baked in and grayed out. Unfortunately, the port chosen by the developers for secure control communication -- 8443 -- is already assigned to the CalDAV protocol, which I also serve inside my LAN. That means that when my router sees CalDAV or EISY traffic arriving from outside our LAN, it has no way of telling to which of two different devices to forward it. Is there any way around the "locked" ports that would allow me to choose the old port I used to use, that worked? Link to comment
KSaccullo01 Posted February 9 Share Posted February 9 Maybe edit: /var/isy/FILES/CONF/NETWORK.CFG I don't know if it will work or break your eisy. Your on your own. you will need root privileges: sudo -i Link to comment
lhranch Posted February 9 Author Share Posted February 9 Ooh! I was totally up for this! However: Any suggestions? Link to comment
jec6613 Posted February 9 Share Posted February 9 8 hours ago, lhranch said: Any suggestions? Link to comment
lhranch Posted February 9 Author Share Posted February 9 OK, well, I have no response to this. My machine clearly doesn't have this file, I'm not imagining it. Perhaps you have some add-on that I don't -- mine is straight factory configuration. Link to comment
paulbates Posted February 9 Share Posted February 9 I would submit a ticket as this is something other users haven't run in to. I have to believe UDI will help you navigate this. Link to comment
jec6613 Posted February 9 Share Posted February 9 23 minutes ago, lhranch said: OK, well, I have no response to this. My machine clearly doesn't have this file, I'm not imagining it. Perhaps you have some add-on that I don't -- mine is straight factory configuration. So is mine, I used sudo Link to comment
lhranch Posted February 9 Author Share Posted February 9 36 minutes ago, jec6613 said: So is mine, I used sudo So did I, you will notice I am operating from root. I also tried precisely the syntax you used from admin, but it didn't change my results. Link to comment
lhranch Posted February 9 Author Share Posted February 9 46 minutes ago, paulbates said: I would submit a ticket as this is something other users haven't run in to. I have to believe UDI will help you navigate this. I opened one last night. UDI seems less than eager to accommodate. "...this is not "seemingly arbitrary restriction". This was done in order to reduce our support issues." Link to comment
lhranch Posted February 9 Author Share Posted February 9 (edited) Perhaps it is significant that I do NOT use the portal facility at all? My operation and administration are completely local. Edited February 9 by lhranch Link to comment
Solution lhranch Posted February 9 Author Solution Share Posted February 9 The tech at UD identified the relevant file as /var/isy/FILES/CONF/0.UCF . It's binary, so changing it isn't trivial, but it's a very short file and it's doable. I have my secure eisy port set to the value I want now. Thanks, all. Link to comment
KSaccullo01 Posted February 10 Share Posted February 10 (edited) i see the file on my stock eisy. sudo find .... did not work. had to use sudo -i. glad you got it working Edited February 10 by KSaccullo01 Link to comment
lhranch Posted February 10 Author Share Posted February 10 (edited) Dunno what to tell you. I posted the entire contents of that directory in transaction 3. It's there for anybody to see. Again, maybe it has something to do with me not using the portal services, I really don't know. Edited February 10 by lhranch Link to comment
Recommended Posts