Led Brightness

[richardl007]

What does the number represent? to goes from 0-255 ?

[Michel Kohanim]

Hello richardl007,

 

I assume you are referring to a Switch/ToggleLinc, correct?

 

The number represents the brightness of the backlight LED from off (0) to 255 brightest.

 

With kind regards,

Michel

What does the number represent? to goes from 0-255 ?

[richardl007]

in the main tab, when i choose a light switch (2476s swithchlink) it says LED Brightness at the bottom. it is set to 0 but the led is on?

[Michel Kohanim]

Hi richardl007,

 

For some SWLs, 0 is full brightness (unfortunately). Would you please try 1 and report back.

 

With kind regards,

Michel

[mitch236]

I've tried many times to get most of my SWL's to dim the LED with no success. I have had three work and they were very important (bedroom). But I am trying now to change the LED brightness of one of my SWL's and nothing happens. It is v.37 in the admin panel. I've tried 0,1,5 and nothing happens.

[Michel Kohanim]

Hi mitch236,

 

For SWLs, as far as I remember, 40 was the starting version which supported the LED brightness.

 

What are the firmware version of those that work?

 

With kind regards,

Michel

[mitch236]

The one's that work are v.38. I wish there were a way to do a firmware update but oh well, I can live with what I have.

[danejasper]

Hi mitch236,

 

For SWLs, as far as I remember, 40 was the starting version which supported the LED brightness.

 

What are the firmware version of those that work?

 

With kind regards,

Michel

 

My switches all seem to be v.35. What's the procedure for updating the firmware in the switches to support LED dimming? I have about 100 switches.

 

Thanks!

 

-Dane

[Brian H]

Sorry to report. Firmware is not field upgradeable. Smarthome and Smartlabs don't do firmware updates from the field.