user181 Posted February 14 Share Posted February 14 Are there high density I/O devices similar to the EZIO8SA? This product has been on my wish list for a while, but I waited too long and now it’s discontinued. So, I’m looking for something comparable which would be more elegant than a silly amount of I/O Lincs to get enough input & output channels. Link to comment Share on other sites More sharing options...
atmarosi Posted February 14 Share Posted February 14 I use a Din IV Relay by digital loggers Link to comment Share on other sites More sharing options...
Techman Posted February 14 Share Posted February 14 If you have, or want to add, zwave then take a look at these: ZOOZ ZEN17 UNIVERSAL RELAY – ZOOZ (getzooz.com) Zooz ZEN16 MultiRelay – ZOOZ (getzooz.com) Link to comment Share on other sites More sharing options...
user181 Posted February 14 Author Share Posted February 14 I use a Din IV Relay by digital loggers That looks interesting. I’d be interested in hearing how you interface it with your controller. Link to comment Share on other sites More sharing options...
atmarosi Posted February 14 Share Posted February 14 It has a full API. Network resources on the ISY side for each ON/OFF. Bob’s your uncle. Link to comment Share on other sites More sharing options...
EricBarish Posted February 14 Share Posted February 14 I've been using CAi web control (a little old, $35) on my ISY 994 and then on Polisy. Can control and get results using network resouces or download nodelink ( need a PI ) and get the node for this device. No PG3 node for this device. 8 digital inputs 8 digital outputs 3 andlog input 8 optional DS18B20 digital temp, 1 optional humidity sensors built-in I2C and SPI support, up to 1000 line PLC program 1 Link to comment Share on other sites More sharing options...
user181 Posted February 15 Author Share Posted February 15 I've been using CAi web control (a little old, $35) on my ISY 994 and then on Polisy. Can control and get results using network resouces or download nodelink ( need a PI ) and get the node for this device. No PG3 node for this device. 8 digital inputs 8 digital outputs 3 andlog input 8 optional DS18B20 digital temp, 1 optional humidity sensors built-in I2C and SPI support, up to 1000 line PLC program Thanks, Eric. That looks like a great solution. Link to comment Share on other sites More sharing options...
user181 Posted February 15 Author Share Posted February 15 Does the CAI WebControl require the add-on networking module in the ISY994? That is another thing I missed the boat on, and didn’t discover until it was too late that you can no longer purchase add-on modules for the 994. Link to comment Share on other sites More sharing options...
EricBarish Posted February 15 Share Posted February 15 If you us nodelink no (but you need the pi to load nodelink and the CAI node and a ISY portal account) . If you us network resources yes. Time to upgrade you system ? That will give you the network resouces, but you will still need the PI to run nodelink to get the CAI node, no PG3 node for CAI devices. I updated two years ago to a polisy, PG2/3 was very unstable on the PI. Nodelink is still running on the PI and never have a problem with it. Link to comment Share on other sites More sharing options...
Recommended Posts